Wall Mounts for the LG OLED B5 65-inch

Mounting specification

The 300 × 200 mm spacing is common enough that compatibility is rarely the problem here. Any mount whose range includes it will bolt on. This is a middle-of-the-road weight at 37.7 lb. Plenty of mounts qualify, so the deciding factor is usually how you want the screen to move rather than what it weighs.

That is roughly 20 per cent below the 47 lb median for a 65-inch screen, which gives you more bracket options than the size alone would suggest. Being OLED changes how you move it more than how you mount it. 37.7 lb over 57 inches of width makes it deceptively easy to carry one-handed, and that is exactly how the panel gets flexed. Keep it vertical from the box to the bracket.

Where the bolts land relative to your studs

At only 11.8 inches across, this pattern is narrower than the 16 inches between studs, the TV's mounting holes sit between them. The mount's wall plate has to be wide enough to reach two studs, or you need a single-stud mount rated for the full panel weight.

So check the width of the mount's wall plate, not just its VESA range. Carrying 37.7 lb off a single stud needs a bracket explicitly rated for it.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Centre of the screen at seated eye level, about 42 inches from the floor. On a 65-inch panel that is a bottom edge near 26 inches and a top edge near 58 inches (4' 10"), and it wants roughly 7.3 feet of viewing distance. That clears a normal console comfortably, so the wall itself is usually the binding constraint rather than the furniture.

The height calculator works this out for your own seating and eye height, and the fireplace planner covers the above-a-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level, over a fireplace, a dresser or a tall console, means the screen should angle down toward you. These tilt mounts are rated for the B5's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more turning force to the wall than a fixed plate does, so at 37.7 lb these want solid framing rather than anchors.

What else the job needs

Most of what goes wrong on a LG install is not the bracket. It is the screw kit that does not match the panel and the cable that is suddenly two feet short once the screen is on the wall.

Other sizes of the B5

Every size of the B5 we hold data for uses the same 300 × 200 mm pattern, so a mount bought for one will physically bolt to another, provided the weight rating and the screen-size range also cover it. That is usually where they differ.

Other TVs with the same 300 × 200 pattern

If you are kitting out more than one room, these share this pattern and can share a bracket model.

• LG QNED 82A edge-lit QNED82A 65", 50.3 lb
• LG QNED evo Mini-LED 9M Wireless QNED9M 65", 52 lb
• LG UHD UA77 UA7700 65", 32 lb
• LG OLED evo C6 C6 65", 36.6 lb
• Samsung OLED 4K S85F 65", 38.4 lb
• Samsung OLED 4K S90F 65", 42.1 lb

Frequently asked questions