Hisense mini-LED TV in a white paneled alcove

A recessed alcove with white paneling, built for a TV. The bracket sits inside the recess, so the TV's depth and the mount's depth were checked against the alcove before the holes were drilled, and the panel was centered in the opening with an even reveal on both sides. The tilt lets the picture angle down out of the niche toward the seating.

Drywall carries nothing on its own, so this bracket hangs on the framing behind it. The studs were found with a stud finder and confirmed with a magnet before the first hole, then the plate was bolted to two of them with lag bolts, levelled with a digital inclinometer and pull-tested before the TV went on.

Tilt is the answer when the wall puts the TV above the viewer: the picture is angled down to the seat, glare from windows and lights is reduced, and the bracket still sits close to the wall.

TV mounting is a flat rate by screen size: $129 up to 54", $159 for 55-69", $209 for 70-79", $299 for 80-94" and $399 from 95" (2 technicians). The bracket is yours or ours from $49, and there is no travel fee.