Wall Mounts for the Hisense A7N 85-inch

Mounting specification

Its 600 × 400 mm pattern is a standard VESA size, so any mount listing that spacing within its supported range will bolt straight on. At 79.4 lb this is a heavy panel. Check the mount's rating rather than assuming, because plenty of brackets advertised for 85-inch screens are rated below this weight, and never hang it on drywall anchors alone.

This is a conventional LED-backlit LCD panel, which at 79.4 lb is toward the lighter end for a 85-inch screen. That widens the field of compatible mounts, but it does not change the rule that the fixings go into framing.

Where the bolts land relative to your studs

At 23.6 inches across, this pattern spans past 16-inch studs and lands close to 24-inch centres, so it will reach solid framing on either spacing.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Put the centre of the screen at seated eye level — about 42 inches from the floor for a normal sofa. On a 85-inch panel that puts the bottom edge at roughly 21 inches and the top at roughly 63 inches, or 5' 3" in feet and inches.

At this size the geometry starts to bite. A 85-inch screen centred at eye level has its bottom edge only 21 inches off the floor, which is below the top of most media consoles — so the console has to move, or the TV goes higher than ideal and you accept the compromise. Measure your furniture before you commit to the size. It also wants a viewing distance of roughly 9.5 feet for balanced viewing, so check that against where your seating actually is.

If a console or a mantel forces it higher, mount as low as the obstruction allows and use a tilting mount to angle the screen back toward you. The height calculator works out the exact number for your seating position, and the fireplace planner handles the above-the-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level — over a fireplace, a dresser or a tall console — means the screen should angle down toward you. These tilt mounts are rated for the A7N's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more leverage to the wall than a fixed plate does, so at 79.4 lb these want solid framing rather than anchors.

What else the job needs

The two things that stall a Hisense install most often are hardware and cable length. Box hardware does not always include the right bolt for a specific panel, and the HDMI cable that reached the old stand rarely reaches once the TV is on the wall.

Other sizes of the A7N

The A7N does not use one pattern across the range: your 85-inch is 600 × 400 mm, while the 43-inch is 300 × 200, the 50-inch is 400 × 200, the 55-inch is 300 × 200, the 65-inch is 400 × 300, the 75-inch is 400 × 300. A mount will not simply transfer between sizes in this range — check the specific size you own.

Other TVs with the same 600 × 400 pattern

These take the same mounts, which is useful if you are buying one bracket for a house with several TVs.

• Hisense ULED U7K U7K 85" — 108.9 lb
• Hisense ULED U8K U8K 85" — 108.9 lb
• Hisense ULED X flagship UX 85" — 111.9 lb
• Hisense A6N A6N 85" — 79.4 lb
• Hisense QD6N Google TV QD6N 85" — 79.4 lb
• Hisense ULED U6N U6N 85" — 90.4 lb

Frequently asked questions