Wall Mounts for the LG QNED 80 edge-lit QNED80 75-inch

Mounting specification

Its 400 × 400 mm pattern is a standard VESA size, so any mount listing that spacing within its supported range will bolt straight on. At 79.1 lb this is a heavy panel. Check the mount's rating rather than assuming, because plenty of brackets advertised for 75-inch screens are rated below this weight, and never hang it on drywall anchors alone.

This is a conventional LED-backlit LCD panel, which at 79.1 lb is toward the lighter end for a 75-inch screen. That widens the field of compatible mounts, but it does not change the rule that the fixings go into framing.

Where the bolts land relative to your studs

At 15.7 inches across, this pattern sits almost exactly on 16-inch stud centres, so the mount's arms and your framing line up naturally. It is the easiest case there is.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Put the centre of the screen at seated eye level — about 42 inches from the floor for a normal sofa. On a 75-inch panel that puts the bottom edge at roughly 24 inches and the top at roughly 60 inches, or 5' in feet and inches.

A 75-inch panel is tall enough that the bottom edge lands around 24 inches, close to the height of a typical media console. Check the clearance over whatever sits underneath before marking the wall — a couple of inches of overlap looks like a mistake even when the height is technically right. It also wants a viewing distance of roughly 8.4 feet for balanced viewing, so check that against where your seating actually is.

If a console or a mantel forces it higher, mount as low as the obstruction allows and use a tilting mount to angle the screen back toward you. The height calculator works out the exact number for your seating position, and the fireplace planner handles the above-the-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level — over a fireplace, a dresser or a tall console — means the screen should angle down toward you. These tilt mounts are rated for the QNED80's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more leverage to the wall than a fixed plate does, so at 79.1 lb these want solid framing rather than anchors.

What else the job needs

The two things that stall a LG install most often are hardware and cable length. Box hardware does not always include the right bolt for a specific panel, and the HDMI cable that reached the old stand rarely reaches once the TV is on the wall.

Other sizes of the QNED80

The QNED80 does not use one pattern across the range: your 75-inch is 400 × 400 mm, while the 50-inch is 200 × 200, the 55-inch is 300 × 300, the 65-inch is 300 × 300, the 86-inch is 600 × 400. A mount will not simply transfer between sizes in this range — check the specific size you own.

Other TVs with the same 400 × 400 pattern

These take the same mounts, which is useful if you are buying one bracket for a house with several TVs.

• Hisense ULED U6K U6K 75" — 60.6 lb
• Hisense ULED U7K U7K 75" — 62.4 lb
• Hisense ULED U6N U6N 75" — 60.6 lb
• Hisense ULED U7N U7N 75" — 60.2 lb
• LG QNED 75 edge-lit QNED75 75" — 79.1 lb
• LG UHD UR8000 UR8000 75" — 69.2 lb

Frequently asked questions