Wall Mounts for the LG UHD UR8000 43-inch

Mounting specification

Its 200 × 200 mm pattern is a standard VESA size, so any mount listing that spacing within its supported range will bolt straight on. At 19.4 lb the panel is light enough that almost any mount rated for its size will carry it comfortably — the VESA pattern, not the weight, is what limits your choice here.

This is a conventional LED-backlit LCD panel, which at 19.4 lb is toward the lighter end for a 43-inch screen. That widens the field of compatible mounts, but it does not change the rule that the fixings go into framing.

Where the bolts land relative to your studs

At only 7.9 inches across, this pattern is narrower than the 16 inches between studs — the TV's mounting holes sit between them. The mount's wall plate has to be wide enough to reach two studs, or you need a single-stud mount rated for the full panel weight.

In practice that means checking one spec people skip: the width of the mount's wall plate. A plate under about 16 inches wide can only reach one stud, and a single-stud mount carrying 19.4 lb wants to be explicitly rated for that. Mounts listed as fitting 16, 18 and 24-inch studs are the safe answer here, because they give you somewhere to land whatever your framing actually does.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Put the centre of the screen at seated eye level — about 42 inches from the floor for a normal sofa. On a 43-inch panel that puts the bottom edge at roughly 31 inches and the top at roughly 53 inches, or 4' 5" in feet and inches.

A 43-inch panel leaves comfortable clearance above a normal console at this height, so the usual constraint is the wall itself rather than the furniture. It also wants a viewing distance of roughly 4.8 feet for balanced viewing, so check that against where your seating actually is.

If a console or a mantel forces it higher, mount as low as the obstruction allows and use a tilting mount to angle the screen back toward you. The height calculator works out the exact number for your seating position, and the fireplace planner handles the above-the-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level — over a fireplace, a dresser or a tall console — means the screen should angle down toward you. These tilt mounts are rated for the UR8000's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more leverage to the wall than a fixed plate does, so at 19.4 lb these want solid framing rather than anchors.

What else the job needs

The two things that stall a LG install most often are hardware and cable length. Box hardware does not always include the right bolt for a specific panel, and the HDMI cable that reached the old stand rarely reaches once the TV is on the wall.

Other sizes of the UR8000

The UR8000 does not use one pattern across the range: your 43-inch is 200 × 200 mm, while the 50-inch is 200 × 200, the 55-inch is 300 × 300, the 65-inch is 300 × 300, the 70-inch is 400 × 400, the 75-inch is 400 × 400, the 86-inch is 600 × 400. A mount will not simply transfer between sizes in this range — check the specific size you own.

Other TVs with the same 200 × 200 pattern

These take the same mounts, which is useful if you are buying one bracket for a house with several TVs.

• LG QNED 75 edge-lit QNED75 43" — 21.6 lb
• LG UHD UR9000 UR9000 43" — 20.5 lb
• LG QNED 80T QNED80T 43" — 20.5 lb
• LG UHD UT8000 UT8000 43" — 19.4 lb
• LG QNED 82A edge-lit QNED82A 43" — 20.7 lb
• LG UHD UA70 UA7000 43" — 16.1 lb

Frequently asked questions