LG QNED QNED70A 43-inch wall mount: VESA 200 × 200 mm, 16.5 lb
The LG QNED70A 43-inch (43QNED70AUA) uses a VESA 200 × 200 mm pattern and weighs 16.5 lb without its stand. Any mount that lists 200 × 200 mm, is rated above 16.5 lb and covers 43-inch screens fits it.
| VESA pattern | 200 × 200 mm (7.87 × 7.87 in) |
|---|---|
| Weight without stand | 16.5 lb (16.8 lb with stand) |
| Screws | M6 |
| US model number | 43QNED70AUA |
| Model year | 2025, QNED LCD (direct-lit) |
VESA and weight from LG's product page, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
Mounts that fit the QNED70A 43"
Each one lists 200 × 200 mm, a rating above 16.5 lb and 43-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the QNED70A 43"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 17 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
PERLESMITH Tilting TV Wall Mount for 23–60 inch TVs up to 115 lbs
For the QNED70A 43"
Cheapest honest tilt bracket for a bedroom or small living-room TV mounted above eye level.
- Fits 23–60" screens
- Rated to 115 lb, your panel is about 17 lb
- Supports VESA up to 400 × 400 mm
$15.99
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 200 × 200 mm and 16.5 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 17 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 200 × 200 mm and 16.5 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 17 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe QNED70A 43-inch against its lineup
LG lists the 2025 QNED70A (QNED LCD (direct-lit)) in 43, 50, 55, 65, 75 and 86 inches. 12 of the 15 LG 43-inch models from 2024 to 2026 in this research use 200 × 200 mm; the others use 300 × 200 (3). 5 of them weigh more than this one. 16.5 lb is about 18% under the 20 lb typical of 43-inch panels, which leaves more brackets to choose from.
The 2025 LG UA7500 43-inch (43UA7500ZUA) lists the same 200 × 200 mm pattern at 16.1 lb (16.5 lb here), so the mounts matched here fit it on paper. It is an LED LCD (direct-lit) set; this one is a QNED LCD (direct-lit) set. UA7500 43-inch mount page →
Screws, studs and height
LG lists M6 screws for the four holes. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are only 7.9 in apart side to side, less than the 16 in between studs. The mount's wall plate has to reach two studs on its own, so check its width, not just its VESA range.
With the center at 42 in for sofa seating, a 43-inch screen runs from about 31 in to 53 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other TVs on 200 × 200 mm
- LG UA7500 43", 16.1 lb
- Vizio VQD 43", 17 lb
- Sony S20M2 43", 17.2 lb
- Vizio VQM 43", 15.8 lb
- Samsung DU7200 43", 15.7 lb
- Samsung QN70H 43", 17.9 lb
Every TV with a 200 × 200 pattern →
Frequently asked questions
What VESA pattern does the QNED70A 43" use?
VESA 200 × 200 mm: 200 mm between the holes side to side and 200 mm top to bottom (7.87 × 7.87 in), with M6 screws. That is from LG's product page, checked Sep 22, 2026.
How much does the QNED70A 43" weigh?
16.5 lb without the stand and 16.8 lb with it. Bracket ratings are for the panel alone, so 16.5 lb is the number to shop against.
Can the QNED70A 43" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 43 in and 16.5 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the QNED70A mounted for you?
Mounting a 43-inch TV is $129 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $49 or a full-motion mount for $59. Every install carries our 3-year workmanship warranty.
Get a free estimate →More LG models: all LG TVs by model · look up another TV