LG QNED evo Mini LED QNED9MA 65-inch wall mount: VESA 300 × 200 mm, 52 lb
The LG QNED9MA 65-inch (65QNED9MAUA) uses a VESA 300 × 200 mm pattern and weighs 52 lb without its stand. Any mount that lists 300 × 200 mm, is rated above 52 lb and covers 65-inch screens fits it. LG includes its wall mount with it and also lists the 300 × 200 mm holes.
| VESA pattern | 300 × 200 mm (11.81 × 7.87 in) |
|---|---|
| Weight without stand | 52 lb |
| Screws | M6 |
| US model number | 65QNED9MAUA |
| Maker's mount | LG wall mount (in the box) |
| Model year | 2025, QNED LCD (edge-lit) |
VESA and weight from LG's product page, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
The QNED9MA comes with its own mount
LG puts its wall mount in the box. A flush mount leaves no room behind the TV for a power strip or a loop of cable, so the part most installs still need is an in-wall power and cable kit.
Power and HDMI run inside the wall
Legrand
For the flush install: power and HDMI through the wall.
Legrand's UL-listed power bridge is the code-correct way to get an outlet behind the TV without running an extension cord inside the wall.
Prices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
Want tilt or swivel instead? These list 300 × 200 mm
Each one lists 300 × 200 mm, a rating above 52 lb and 65-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the QNED9MA 65"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 52 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
USX MOUNT Tilting TV Wall Mount for Most 37"-95" Flat Curved Screen Television
For the QNED9MA 65"
Covers almost every mainstream TV up to 95 inches and stays low-profile against the wall.
- Fits 37–95" screens
- Rated to 132 lb, your panel is about 52 lb
- Supports VESA up to 600 × 400 mm
$23.94
See it on AmazonIf it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 300 × 200 mm and 52 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 52 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 300 × 200 mm and 52 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 52 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe QNED9MA 65-inch against its lineup
LG lists the 2025 QNED9MA (QNED LCD (edge-lit)) in 65 and 75 inches. 19 of the 32 LG 65-inch models from 2024 to 2026 in this research use 300 × 200 mm; the others use 300 × 300 (9) or 400 × 300 (2). 3 of them weigh more than this one. 52 lb is about 11% over the 47 lb typical of 65-inch panels, so read the weight rating before the size range.
Screws, studs and height
LG lists M6 screws for the four holes. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are only 11.8 in apart side to side, less than the 16 in between studs. The mount's wall plate has to reach two studs on its own, so check its width, not just its VESA range.
With the center at 42 in for sofa seating, a 65-inch screen runs from about 26 in to 58 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other TVs on 300 × 200 mm
- LG QNED82A 65", 50.3 lb
- Samsung S90F 65", 46.7 lb
- Samsung S90H 65", 42.1 lb
- Samsung S85H 65", 38.4 lb
- LG B6 65", 37.7 lb
- LG C6 65", 36.6 lb
Every TV with a 300 × 200 pattern →
Frequently asked questions
What VESA pattern does the QNED9MA 65" use?
VESA 300 × 200 mm: 300 mm between the holes side to side and 200 mm top to bottom (11.81 × 7.87 in), with M6 screws. That is from LG's product page, checked Sep 22, 2026.
How much does the QNED9MA 65" weigh?
52 lb without the stand. Bracket ratings are for the panel alone, so 52 lb is the number to shop against.
Does the QNED9MA come with a wall mount?
Yes. LG lists its wall mount in the box. The 300 × 200 mm VESA holes are listed as well, which is what a tilting or full-motion bracket would use.
Can the QNED9MA 65" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 65 in and 52 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the QNED9MA mounted for you?
Mounting a 65-inch TV is $159 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More LG models: all LG TVs by model · look up another TV