Roku Pro Series RAD5 65-inch wall mount: VESA 400 × 200 mm, 36 lb
The Roku RAD5 65-inch (65RAD5) uses a VESA 400 × 200 mm pattern and weighs 36 lb without its stand. Any mount that lists 400 × 200 mm, is rated above 36 lb and covers 65-inch screens fits it.
| VESA pattern | 400 × 200 mm (15.75 × 7.87 in) |
|---|---|
| Weight without stand | 36 lb (37 lb with stand) |
| Screws | M6, 14 mm screw depth |
| US model number | 65RAD5 |
| Model year | 2026, OLED |
VESA and weight from Roku's product page, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
Mounts that fit the RAD5 65"
Each one lists 400 × 200 mm, a rating above 36 lb and 65-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the RAD5 65"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 36 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
USX MOUNT Tilting TV Wall Mount for Most 37"-95" Flat Curved Screen Television
For the RAD5 65"
Covers almost every mainstream TV up to 95 inches and stays low-profile against the wall.
- Fits 37–95" screens
- Rated to 132 lb, your panel is about 36 lb
- Supports VESA up to 600 × 400 mm
$23.94
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 400 × 200 mm and 36 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 36 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 400 × 200 mm and 36 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 36 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe RAD5 65-inch against its lineup
Roku lists the 2026 RAD5 (OLED) in 55 and 65 inches. 1 of the 7 Roku 65-inch models from 2024 to 2026 in this research use 400 × 200 mm; the others use 400 × 300 (6). 3 of them weigh more than this one. 36 lb is about 23% under the 47 lb typical of 65-inch panels, which leaves more brackets to choose from.
Screws, studs and height
Roku lists M6 screws for the four holes and a 14 mm screw depth. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are 15.7 in apart side to side, close to 16-inch stud spacing, so the mount's arms and the studs line up easily.
With the center at 42 in for sofa seating, a 65-inch screen runs from about 26 in to 58 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other sizes of the RAD5
The RAD5 changes pattern with size: 55" 300 × 200, 65" 400 × 200. Buy for the size you own.
| Size | VESA | Weight without stand |
|---|---|---|
| 55" | 300 × 200 mm | 29 lb (55RAD5) |
Other TVs on 400 × 200 mm
- Sony A60 65", 38.2 lb
- Hisense U7SF 55", 33.3 lb
- Hisense U65QF 55", 30.9 lb
- Hisense U7N 55", 30.6 lb
- Hisense QD7QF 55", 28.9 lb
- Hisense QD65NF 55", 24 lb
Frequently asked questions
What VESA pattern does the RAD5 65" use?
VESA 400 × 200 mm: 400 mm between the holes side to side and 200 mm top to bottom (15.75 × 7.87 in), with M6 screws. That is from Roku's product page, checked Sep 22, 2026.
How much does the RAD5 65" weigh?
36 lb without the stand and 37 lb with it. Bracket ratings are for the panel alone, so 36 lb is the number to shop against.
Can the RAD5 65" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 65 in and 36 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the RAD5 mounted for you?
Mounting a 65-inch TV is $159 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Roku models: all Roku TVs by model · look up another TV