Wall Mounts for the TCL QM8 Class 115in QM891G 115-inch

Mounting specification

Its 1000 × 600 mm pattern is outside the common VESA sizes, so a typical consumer bracket will not line up. You need a mount that explicitly lists this spacing or a universal large-format plate. At 216.7 lb this is in the heavy-duty class. It needs a mount explicitly rated above that figure, fixings into solid framing or masonry, and realistically two people to lift it onto the bracket.

This is a QLED Mini-LED LCD panel. The backlight array and heat-spreader layers add real weight compared with a basic LED set of the same size, which is why it comes in at 216.7 lb — check your bracket's rating against that number rather than against a generic figure for 115-inch TVs.

Where the bolts land relative to your studs

At 39.4 inches across, this pattern comfortably clears 16-inch stud spacing, so a standard wall plate will reach framing on both sides.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Put the centre of the screen at seated eye level — about 42 inches from the floor for a normal sofa. On a 115-inch panel that puts the bottom edge at roughly 14 inches and the top at roughly 70 inches, or 5' 10" in feet and inches.

At this size the geometry starts to bite. A 115-inch screen centred at eye level has its bottom edge only 14 inches off the floor, which is below the top of most media consoles — so the console has to move, or the TV goes higher than ideal and you accept the compromise. Measure your furniture before you commit to the size. It also wants a viewing distance of roughly 12.9 feet for balanced viewing, so check that against where your seating actually is.

If a console or a mantel forces it higher, mount as low as the obstruction allows and use a tilting mount to angle the screen back toward you. The height calculator works out the exact number for your seating position, and the fireplace planner handles the above-the-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level — over a fireplace, a dresser or a tall console — means the screen should angle down toward you. These tilt mounts are rated for the QM891G's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more leverage to the wall than a fixed plate does, so at 216.7 lb these want solid framing rather than anchors.

What else the job needs

The two things that stall a TCL install most often are hardware and cable length. Box hardware does not always include the right bolt for a specific panel, and the HDMI cable that reached the old stand rarely reaches once the TV is on the wall.

Other TVs with the same 1000 × 600 pattern

These take the same mounts, which is useful if you are buying one bracket for a house with several TVs.

• TCL Q-Class QD-Mini LED QM7K QM7K 115" — 216.7 lb

Frequently asked questions