Hisense QD5 Hi-QLED QD5QG 98-inch wall mount: VESA 600 × 300 mm, 120.2 lb
The Hisense QD5QG 98-inch (98QD5QG) uses a VESA 600 × 300 mm pattern and weighs 120.2 lb without its stand. 600 × 300 mm is outside the standard VESA sizes, so it needs a mount that names this spacing or a large-format plate rated above 120.2 lb.
| VESA pattern | 600 × 300 mm (23.62 × 11.81 in), non-standard |
|---|---|
| Weight without stand | 120.2 lb (124.6 lb with stand) |
| Screws | M8 |
| US model number | 98QD5QG, 98QD5QGC, 98QD65N, 98QD6N, 98QD6QG |
| Model year | 2025, QLED LCD |
VESA and weight from Hisense's setup guide, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
This page also covers the 2025 Hisense QD5030G 98-inch (98QD5030G, 120.2 lb): Hisense lists the same 600 × 300 mm pattern and a weight within a pound, so the same mounts fit.
Mounts that fit the QD5QG 98"
Each one lists 600 × 300 mm, a rating above 120.2 lb and 98-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
FORGING MOUNT Heavy Duty XXL Full Motion TV Wall Mount for 55-120 inch…
For the QD5QG 98"
275 lb and a 900 x 600 pattern with a 42-inch reach, the heaviest-duty articulating arm in this catalog.
- Fits 55–120" screens
- Rated to 275 lb, your panel is about 120 lb
- Supports VESA up to 900 × 600 mm
$91.58
See it on Amazon
Lowest current price of the mounts that fit
PERLESMITH Advanced Tilting TV Wall Mount for 42–100 inch TVs up to 160 lbs
For the QD5QG 98"
One of the few tilt mounts that supports the square 600 x 600 pattern and 160 lb of panel.
- Fits 42–100" screens
- Rated to 160 lb, your panel is about 120 lb
- Supports VESA up to 600 × 600 mm
$30.99
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
HOME VISION Heavy Duty Tilt TV Wall Mount for 48-120 Inch Flat Screen
Listed for 600 × 300 mm and 120.2 lb
Built for the 98-inch-and-up class where normal brackets stop.
- Fits 48–120" screens
Check before buying: The listing does not state a weight rating; The listing does not state a maximum VESA pattern, confirm it before you buy.
$59.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear Large Full Motion TV Wall Mount for 55–120 inch TVs up to 220 lbs
Listed for 600 × 300 mm and 120.2 lb
220 lb of capacity for the 98-inch and 100-inch panels that have become normal.
- Fits 55–120" screens
- Rated to 220 lb, your panel is about 120 lb
Check before buying: The listing does not state a maximum VESA pattern, confirm it before you buy.
$139.98
See it on AmazonThe QD5QG 98-inch against its lineup
Hisense lists the 2025 QD5QG (QLED LCD) in 98 inches only. 2 of the 2 Hisense 98-inch models from 2024 to 2026 in this research use 600 × 300 mm. This is the heaviest of them. 120.2 lb is about 22% under the 155 lb typical of 98-inch panels, which leaves more brackets to choose from.
Screws, studs and height
Hisense lists M8 screws for the four holes. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are 23.6 in apart side to side, wider than 16-inch stud spacing, so a standard wall plate reaches a stud on each side.
With the center at 42 in for sofa seating, a 98-inch screen runs from about 18 in to 66 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Frequently asked questions
What VESA pattern does the QD5QG 98" use?
VESA 600 × 300 mm: 600 mm between the holes side to side and 300 mm top to bottom (23.62 × 11.81 in), with M8 screws. That is from Hisense's setup guide, checked Sep 22, 2026.
How much does the QD5QG 98" weigh?
120.2 lb without the stand and 124.6 lb with it. Bracket ratings are for the panel alone, so 120.2 lb is the number to shop against, and it is a two-person lift.
Can the QD5QG 98" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 98 in and 120.2 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the QD5QG mounted for you?
Mounting a 98-inch TV is $299 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Hisense models: all Hisense TVs by model · look up another TV