Hisense QD7 Mini-LED QD7QF 75-inch wall mount: VESA 600 × 400 mm, 63.9 lb
The Hisense QD7QF 75-inch (75QD7QF) uses a VESA 600 × 400 mm pattern and weighs 63.9 lb without its stand. Any mount that lists 600 × 400 mm, is rated above 63.9 lb and covers 75-inch screens fits it.
| VESA pattern | 600 × 400 mm (23.62 × 15.75 in) |
|---|---|
| Weight without stand | 63.9 lb (65 lb with stand) |
| Screws | M6 |
| US model number | 75QD7QF, 75QD75QF, 75QD75QFC, 75QD7QFD |
| Model year | 2025, QLED Mini-LED LCD |
VESA and weight from Hisense's setup guide, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
Mounts that fit the QD7QF 75"
Each one lists 600 × 400 mm, a rating above 63.9 lb and 75-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the QD7QF 75"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 64 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
USX MOUNT Tilting TV Wall Mount for Most 37"-95" Flat Curved Screen Television
For the QD7QF 75"
Covers almost every mainstream TV up to 95 inches and stays low-profile against the wall.
- Fits 37–95" screens
- Rated to 132 lb, your panel is about 64 lb
- Supports VESA up to 600 × 400 mm
$23.94
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 600 × 400 mm and 63.9 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 64 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear Corner TV Wall Mount Long Arm TV Mount Bracket for 37-75 Inch TVs
Listed for 600 × 400 mm and 63.9 lb
32 inches of extension with a 600 x 400 pattern, reaches out of a corner and still swings back flat.
- Fits 37–75" screens
- Rated to 100 lb, your panel is about 64 lb
- Supports VESA up to 600 × 400 mm
$59.97
See it on AmazonThe QD7QF 75-inch against its lineup
Hisense lists the 2025 QD7QF (QLED Mini-LED LCD) in 50, 55, 65, 75, 85 and 100 inches. 5 of the 14 Hisense 75-inch models from 2024 to 2026 in this research use 600 × 400 mm; the others use 400 × 400 (4) or 500 × 400 (3). 2 of them weigh more than this one. 63.9 lb is close to the 62 lb typical of 75-inch panels, so size-rated brackets are in the right range; check the rating anyway.
The 2025 Hisense U75QG 75-inch (75U75QG) lists the same 600 × 400 mm pattern and 63.9 lb, so the mounts matched here fit it on paper. Hisense lists no other mounting difference between the two; they are separate models in its lineup. U75QG 75-inch mount page →
Screws, studs and height
Hisense lists M6 screws for the four holes. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are 23.6 in apart side to side, wider than 16-inch stud spacing, so a standard wall plate reaches a stud on each side.
With the center at 42 in for sofa seating, a 75-inch screen runs from about 24 in to 60 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other sizes of the QD7QF
The QD7QF changes pattern with size: 50" 300 × 200, 55" 400 × 200, 75" 600 × 400, 85" 600 × 400. Buy for the size you own.
| Size | VESA | Weight without stand |
|---|---|---|
| 50" | 300 × 200 mm | 23.8 lb (50QD7QF) |
| 55" | 400 × 200 mm | 28.9 lb (55QD7QF) |
| 85" | 600 × 400 mm | 80.2 lb (85QD7QF) |
Other TVs on 600 × 400 mm
- Hisense U75QG 75", 63.9 lb
- Hisense UR9SG 75", 76.1 lb
- TCL X11L 75", 86 lb
- Vizio VQM 85", 65.3 lb
- Hisense E7SF 85", 66.1 lb
- Roku R5CX 85", 60.2 lb
Every TV with a 600 × 400 pattern →
Frequently asked questions
What VESA pattern does the QD7QF 75" use?
VESA 600 × 400 mm: 600 mm between the holes side to side and 400 mm top to bottom (23.62 × 15.75 in), with M6 screws. That is from Hisense's setup guide, checked Sep 22, 2026.
How much does the QD7QF 75" weigh?
63.9 lb without the stand and 65 lb with it. Bracket ratings are for the panel alone, so 63.9 lb is the number to shop against.
Can the QD7QF 75" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 75 in and 63.9 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the QD7QF mounted for you?
Mounting a 75-inch TV is $209 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Hisense models: all Hisense TVs by model · look up another TV