Hisense CanvasTV S7N 65-inch wall mount: VESA 400 × 300 mm, 61.7 lb
The Hisense S7N 65-inch (65S7N) uses a VESA 400 × 300 mm pattern and weighs 61.7 lb without its stand. Any mount that lists 400 × 300 mm, is rated above 61.7 lb and covers 65-inch screens fits it. Hisense includes its wall mount assembly (CanvasTV) with it and also lists the 400 × 300 mm holes.
| VESA pattern | 400 × 300 mm (15.75 × 11.81 in) |
|---|---|
| Weight without stand | 61.7 lb (62.6 lb with stand) |
| Screws | M6 |
| US model number | 65S7N |
| Maker's mount | Hisense wall mount assembly (CanvasTV) (in the box) |
| Model year | 2024, QLED LCD |
VESA and weight from Hisense's setup guide, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
The S7N comes with its own mount
Hisense puts its wall mount assembly (CanvasTV) in the box. A flush mount leaves no room behind the TV for a power strip or a loop of cable, so the part most installs still need is an in-wall power and cable kit.
Power and HDMI run inside the wall
Legrand
For the flush install: power and HDMI through the wall.
Legrand's UL-listed power bridge is the code-correct way to get an outlet behind the TV without running an extension cord inside the wall.
Prices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
Want tilt or swivel instead? These list 400 × 300 mm
Each one lists 400 × 300 mm, a rating above 61.7 lb and 65-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the S7N 65"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 62 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
USX MOUNT Tilting TV Wall Mount for Most 37"-95" Flat Curved Screen Television
For the S7N 65"
Covers almost every mainstream TV up to 95 inches and stays low-profile against the wall.
- Fits 37–95" screens
- Rated to 132 lb, your panel is about 62 lb
- Supports VESA up to 600 × 400 mm
$23.94
See it on AmazonIf it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 400 × 300 mm and 61.7 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 62 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 400 × 300 mm and 61.7 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 62 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe S7N 65-inch against its lineup
Hisense lists the 2024 S7N (QLED LCD) in 55, 65 and 75 inches. 10 of the 15 Hisense 65-inch models from 2024 to 2026 in this research use 400 × 300 mm; the others use 400 × 400 (5). This is the heaviest of them. 61.7 lb is about 31% over the 47 lb typical of 65-inch panels, so read the weight rating before the size range.
The 2026 S7SG 65-inch keeps 400 × 300 mm at 47.4 lb. S7SG 65-inch mount page →
Screws, studs and height
Hisense lists M6 screws for the four holes. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are 15.7 in apart side to side, close to 16-inch stud spacing, so the mount's arms and the studs line up easily.
With the center at 42 in for sofa seating, a 65-inch screen runs from about 26 in to 58 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other TVs on 400 × 300 mm
- Roku R8CX 65", 63 lb
- Samsung QN900F 65", 56.2 lb
- Samsung QN90F 65", 53.4 lb
- Samsung QN95D 65", 52.5 lb
- Samsung QNX1D 65", 50.9 lb
- Samsung QN80F 65", 50 lb
Every TV with a 400 × 300 pattern →
Frequently asked questions
What VESA pattern does the S7N 65" use?
VESA 400 × 300 mm: 400 mm between the holes side to side and 300 mm top to bottom (15.75 × 11.81 in), with M6 screws. That is from Hisense's setup guide, checked Sep 22, 2026.
How much does the S7N 65" weigh?
61.7 lb without the stand and 62.6 lb with it. Bracket ratings are for the panel alone, so 61.7 lb is the number to shop against.
Does the S7N come with a wall mount?
Yes. Hisense lists its wall mount assembly (CanvasTV) in the box. The 400 × 300 mm VESA holes are listed as well, which is what a tilting or full-motion bracket would use.
Can the S7N 65" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 65 in and 61.7 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the S7N mounted for you?
Mounting a 65-inch TV is $159 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Hisense models: all Hisense TVs by model · look up another TV