Hisense CanvasTV S7 S7SG 55-inch wall mount: VESA 300 × 200 mm, 31.7 lb
The Hisense S7SG 55-inch (55S7SG) uses a VESA 300 × 200 mm pattern and weighs 31.7 lb without its stand. Any mount that lists 300 × 200 mm, is rated above 31.7 lb and covers 55-inch screens fits it. Hisense includes its wall mount assembly (CanvasTV) with it and also lists the 300 × 200 mm holes.
| VESA pattern | 300 × 200 mm (11.81 × 7.87 in) |
|---|---|
| Weight without stand | 31.7 lb (32 lb with stand) |
| Screws | M6 |
| US model number | 55S7SG, 55S70SG, 55S75SG, 55S75SGB, 55S75SGC, 55S7SGD |
| Maker's mount | Hisense wall mount assembly (CanvasTV) (in the box) |
| Model year | 2026, QLED LCD |
VESA and weight from Hisense's setup guide, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
The S7SG comes with its own mount
Hisense puts its wall mount assembly (CanvasTV) in the box. A flush mount leaves no room behind the TV for a power strip or a loop of cable, so the part most installs still need is an in-wall power and cable kit.
Power and HDMI run inside the wall
Legrand
For the flush install: power and HDMI through the wall.
Legrand's UL-listed power bridge is the code-correct way to get an outlet behind the TV without running an extension cord inside the wall.
Prices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
Want tilt or swivel instead? These list 300 × 200 mm
Each one lists 300 × 200 mm, a rating above 31.7 lb and 55-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the S7SG 55"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 32 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
PERLESMITH Tilting TV Wall Mount for 23–60 inch TVs up to 115 lbs
For the S7SG 55"
Cheapest honest tilt bracket for a bedroom or small living-room TV mounted above eye level.
- Fits 23–60" screens
- Rated to 115 lb, your panel is about 32 lb
- Supports VESA up to 400 × 400 mm
$15.99
See it on AmazonIf it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 300 × 200 mm and 31.7 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 32 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 300 × 200 mm and 31.7 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 32 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe S7SG 55-inch against its lineup
Hisense lists the 2026 S7SG (QLED LCD) in 50, 55, 65, 75 and 85 inches. 4 of the 14 Hisense 55-inch models from 2024 to 2026 in this research use 300 × 200 mm; the others use 400 × 200 (7) or 400 × 400 (2). 4 of them weigh more than this one. 31.7 lb is close to the 33 lb typical of 55-inch panels, so size-rated brackets are in the right range; check the rating anyway.
Screws, studs and height
Hisense lists M6 screws for the four holes. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are only 11.8 in apart side to side, less than the 16 in between studs. The mount's wall plate has to reach two studs on its own, so check its width, not just its VESA range.
With the center at 42 in for sofa seating, a 55-inch screen runs from about 29 in to 55 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other sizes of the S7SG
The S7SG changes pattern with size: 50" 300 × 200, 55" 300 × 200, 65" 400 × 300. Buy for the size you own.
Other TVs on 300 × 200 mm
- Samsung R85H 55", 32.2 lb
- Samsung S90H 55", 32.2 lb
- LG C6 55", 31.1 lb
- Sony A60 55", 30.2 lb
- Hisense U6SF-PRO 55", 29.8 lb
- Roku RAD5 55", 29 lb
Every TV with a 300 × 200 pattern →
Frequently asked questions
What VESA pattern does the S7SG 55" use?
VESA 300 × 200 mm: 300 mm between the holes side to side and 200 mm top to bottom (11.81 × 7.87 in), with M6 screws. That is from Hisense's setup guide, checked Sep 22, 2026.
How much does the S7SG 55" weigh?
31.7 lb without the stand and 32 lb with it. Bracket ratings are for the panel alone, so 31.7 lb is the number to shop against.
Does the S7SG come with a wall mount?
Yes. Hisense lists its wall mount assembly (CanvasTV) in the box. The 300 × 200 mm VESA holes are listed as well, which is what a tilting or full-motion bracket would use.
Can the S7SG 55" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 55 in and 31.7 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the S7SG mounted for you?
Mounting a 55-inch TV is $159 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Hisense models: all Hisense TVs by model · look up another TV