Roku Select Series 4K R4C5 43-inch wall mount: VESA 300 × 300 mm, 14.4 lb
The Roku R4C5 43-inch (43R4C5) uses a VESA 300 × 300 mm pattern and weighs 14.4 lb without its stand. Any mount that lists 300 × 300 mm, is rated above 14.4 lb and covers 43-inch screens fits it.
| VESA pattern | 300 × 300 mm (11.81 × 11.81 in) |
|---|---|
| Weight without stand | 14.4 lb |
| Screws | M6, 8 mm screw depth |
| US model number | 43R4C5 |
| Model year | 2025, LED LCD (direct-lit) |
VESA and weight from Roku's TV mounting chart, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
This page also covers the 2024 Roku R4AX 43-inch (43R4AX, 15 lb): Roku lists the same 300 × 300 mm pattern and a weight within a pound, so the same mounts fit.
Mounts that fit the R4C5 43"
Each one lists 300 × 300 mm, a rating above 14.4 lb and 43-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the R4C5 43"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 14 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
PERLESMITH Tilting TV Wall Mount for 23–60 inch TVs up to 115 lbs
For the R4C5 43"
Cheapest honest tilt bracket for a bedroom or small living-room TV mounted above eye level.
- Fits 23–60" screens
- Rated to 115 lb, your panel is about 14 lb
- Supports VESA up to 400 × 400 mm
$15.99
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 300 × 300 mm and 14.4 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 14 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 300 × 300 mm and 14.4 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 14 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe R4C5 43-inch against its lineup
Roku lists the 2025 R4C5 (LED LCD (direct-lit)) in 43, 50, 55, 65, 75 and 85 inches. 2 of the 2 Roku 43-inch models from 2024 to 2026 in this research use 300 × 300 mm. This is the lightest of them. 14.4 lb is about 28% under the 20 lb typical of 43-inch panels, which leaves more brackets to choose from.
Screws, studs and height
Roku lists M6 screws for the four holes and a 8 mm screw depth. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are only 11.8 in apart side to side, less than the 16 in between studs. The mount's wall plate has to reach two studs on its own, so check its width, not just its VESA range.
With the center at 42 in for sofa seating, a 43-inch screen runs from about 31 in to 53 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other sizes of the R4C5
The R4C5 changes pattern with size: 43" 300 × 300, 65" 400 × 300. Buy for the size you own.
| Size | VESA | Weight without stand |
|---|---|---|
| 65" | 400 × 300 mm | 31.1 lb (65R4C5) |
Other TVs on 300 × 300 mm
Every TV with a 300 × 300 pattern →
Frequently asked questions
What VESA pattern does the R4C5 43" use?
VESA 300 × 300 mm: 300 mm between the holes side to side and 300 mm top to bottom (11.81 × 11.81 in), with M6 screws. That is from Roku's TV mounting chart, checked Sep 22, 2026.
How much does the R4C5 43" weigh?
14.4 lb without the stand. Bracket ratings are for the panel alone, so 14.4 lb is the number to shop against.
Can the R4C5 43" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 43 in and 14.4 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the R4C5 mounted for you?
Mounting a 43-inch TV is $129 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $49 or a full-motion mount for $59. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Roku models: all Roku TVs by model · look up another TV