Wall Mounts for the Sony BRAVIA 2 II LED S20M2 50-inch

Mounting specification

The 200 × 200 mm spacing is common enough that compatibility is rarely the problem here. Any mount whose range includes it will bolt on. Weight is not the constraint on this one. At 21.6 lb it sits well inside what any 50-inch bracket handles, so choose on pattern and movement instead.

That is roughly 20 per cent below the 27 lb median for a 50-inch screen, which gives you more bracket options than the size alone would suggest. This is a conventional LED-backlit LCD panel, which at 21.6 lb is toward the lighter end for a 50-inch screen. That widens the field of compatible mounts, though it does not change the rule that the fixings go into framing.

Where the bolts land relative to your studs

At only 7.9 inches across, this pattern is narrower than the 16 inches between studs, the TV's mounting holes sit between them. The mount's wall plate has to be wide enough to reach two studs, or you need a single-stud mount rated for the full panel weight.

So check the width of the mount's wall plate, not just its VESA range. Carrying 21.6 lb off a single stud needs a bracket explicitly rated for it.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Centre of the screen at seated eye level, about 42 inches from the floor. On a 50-inch panel that is a bottom edge near 30 inches and a top edge near 54 inches (4' 6"), and it wants roughly 5.6 feet of viewing distance. That clears a normal console comfortably, so the wall itself is usually the binding constraint rather than the furniture.

The height calculator works this out for your own seating and eye height, and the fireplace planner covers the above-a-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level, over a fireplace, a dresser or a tall console, means the screen should angle down toward you. These tilt mounts are rated for the S20M2's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more turning force to the wall than a fixed plate does, so at 21.6 lb these want solid framing rather than anchors.

What else the job needs

Most of what goes wrong on a Sony install is not the bracket. It is the screw kit that does not match the panel and the cable that is suddenly two feet short once the screen is on the wall.

Other sizes of the S20M2

The S20M2 does not use one pattern across the range. Your 50-inch is 200 × 200 mm, while the 43-inch is 200 × 200, the 55-inch is 300 × 300, the 65-inch is 300 × 300, the 75-inch is 300 × 300. A mount will not simply transfer between sizes here, so check the size you actually own.

Other TVs with the same 200 × 200 pattern

If you are kitting out more than one room, these share this pattern and can share a bracket model.

• LG QNED 82A edge-lit QNED82A 50", 26.9 lb
• LG QNED evo Mini-LED 85A QNED85A 50", 28.7 lb
• LG UHD UA70 UA7000 50", 20.7 lb
• Samsung The Frame LS03FA 50", 26 lb
• Samsung Neo QLED 4K QN90F 50", 29.8 lb
• Samsung Crystal UHD U8000F 50", 18.3 lb

Frequently asked questions