Wall Mounts for the Sony BRAVIA 7 II True RGB XR70M2 50-inch

Mounting specification

Its 200 × 200 mm pattern is a standard VESA size, so any mount listing that spacing within its supported range bolts straight on. At 34.6 lb it sits in the mainstream weight band, so the field of compatible mounts is wide. Two lag bolts into a single stud hold it, though spanning two studs is always better.

That is roughly 28 per cent above the 27 lb median for a 50-inch screen, so a bracket chosen on size alone may well be under-rated for it. This is a True RGB Mini-LED LCD panel. The backlight array and heat-spreader layers add real weight over a basic LED set of the same size, which is why it comes in at 34.6 lb. Check your bracket's rating against that number rather than a generic figure for 50-inch TVs.

Where the bolts land relative to your studs

At only 7.9 inches across, this pattern is narrower than the 16 inches between studs, the TV's mounting holes sit between them. The mount's wall plate has to be wide enough to reach two studs, or you need a single-stud mount rated for the full panel weight.

So check the width of the mount's wall plate, not just its VESA range. Carrying 34.6 lb off a single stud needs a bracket explicitly rated for it.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Centre of the screen at seated eye level, about 42 inches from the floor. On a 50-inch panel that is a bottom edge near 30 inches and a top edge near 54 inches (4' 6"), and it wants roughly 5.6 feet of viewing distance. That clears a normal console comfortably, so the wall itself is usually the binding constraint rather than the furniture.

The height calculator works this out for your own seating and eye height, and the fireplace planner covers the above-a-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level, over a fireplace, a dresser or a tall console, means the screen should angle down toward you. These tilt mounts are rated for the XR70M2's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more turning force to the wall than a fixed plate does, so at 34.6 lb these want solid framing rather than anchors.

What else the job needs

The two things that stall a Sony install most often are hardware and cable length. Box hardware does not always include the right bolt for a specific panel, and the HDMI cable that reached the old stand rarely reaches once the TV is on the wall.

Other sizes of the XR70M2

The XR70M2 does not use one pattern across the range. Your 50-inch is 200 × 200 mm, while the 75-inch is 300 × 300, the 85-inch is 400 × 400. A mount will not simply transfer between sizes here, so check the size you actually own.

Other TVs with the same 200 × 200 pattern

These take the same mounts, which is useful if you are buying one bracket for a house with several TVs.

• LG QNED 82A edge-lit QNED82A 50", 26.9 lb
• LG QNED evo Mini-LED 85A QNED85A 50", 28.7 lb
• LG UHD UA70 UA7000 50", 20.7 lb
• Samsung The Frame LS03FA 50", 26 lb
• Samsung Neo QLED 4K QN90F 50", 29.8 lb
• Samsung Crystal UHD U8000F 50", 18.3 lb

Frequently asked questions