Sony BRAVIA 8 II XR80M2 55-inch wall mount: VESA 300 × 300 mm, 37.9 lb
The Sony XR80M2 55-inch (K-55XR80M2) uses a VESA 300 × 300 mm pattern and weighs 37.9 lb without its stand. Any mount that lists 300 × 300 mm, is rated above 37.9 lb and covers 55-inch screens fits it.
| VESA pattern | 300 × 300 mm (11.81 × 11.81 in) |
|---|---|
| Weight without stand | 37.9 lb (40.6 lb with stand) |
| US model number | K-55XR80M2, K-55XR80CM2 |
| Model year | 2025, QD-OLED |
VESA and weight from Sony's product page, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
This page also covers the 2025 Sony XR8B 55-inch (K-55XR8B, 37.7 lb) and 2024 Sony XR80 55-inch (K-55XR80, 37.7 lb): Sony lists the same 300 × 300 mm pattern and a weight within a pound, so the same mounts fit.
Mounts that fit the XR80M2 55"
Each one lists 300 × 300 mm, a rating above 37.9 lb and 55-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the XR80M2 55"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 38 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
PERLESMITH Tilting TV Wall Mount for 23–60 inch TVs up to 115 lbs
For the XR80M2 55"
Cheapest honest tilt bracket for a bedroom or small living-room TV mounted above eye level.
- Fits 23–60" screens
- Rated to 115 lb, your panel is about 38 lb
- Supports VESA up to 400 × 400 mm
$15.99
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 300 × 300 mm and 37.9 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 38 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 300 × 300 mm and 37.9 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 38 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe XR80M2 55-inch against its lineup
Sony lists the 2025 XR80M2 (QD-OLED) in 55 and 65 inches. 9 of the 10 Sony 55-inch models from 2024 to 2026 in this research use 300 × 300 mm; the others use 300 × 200 (1). 3 of them weigh more than this one. 37.9 lb is about 15% over the 33 lb typical of 55-inch panels, so read the weight rating before the size range.
Screws, studs and height
The holes are only 11.8 in apart side to side, less than the 16 in between studs. The mount's wall plate has to reach two studs on its own, so check its width, not just its VESA range.
With the center at 42 in for sofa seating, a 55-inch screen runs from about 29 in to 55 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other sizes of the XR80M2
Every XR80M2 size with a page uses 300 × 300 mm, so one bracket model can serve two of them if its size range and rating cover both.
| Size | VESA | Weight without stand |
|---|---|---|
| 65" | 300 × 300 mm | 50.5 lb (K-65XR80M2) |
Other TVs on 300 × 300 mm
- Sony XR50 55", 39 lb
- Sony S30 55", 35.3 lb
- Sony XR70M2 55", 40.6 lb
- LG QNED85A 55", 32.8 lb
- Sony XR70 55", 43.9 lb
- LG UT8000 55", 30.9 lb
Every TV with a 300 × 300 pattern →
Frequently asked questions
What VESA pattern does the XR80M2 55" use?
VESA 300 × 300 mm: 300 mm between the holes side to side and 300 mm top to bottom (11.81 × 11.81 in). That is from Sony's product page, checked Sep 22, 2026.
How much does the XR80M2 55" weigh?
37.9 lb without the stand and 40.6 lb with it. Bracket ratings are for the panel alone, so 37.9 lb is the number to shop against.
Can the XR80M2 55" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 55 in and 37.9 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the XR80M2 mounted for you?
Mounting a 55-inch TV is $159 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Sony models: all Sony TVs by model · look up another TV