Hisense E7 Hi-QLED MiniLED E7SF 75-inch wall mount: VESA 500 × 400 mm, 54.7 lb
The Hisense E7SF 75-inch (75E7SF) uses a VESA 500 × 400 mm pattern and weighs 54.7 lb without its stand. 500 × 400 mm is outside the standard VESA sizes, so it needs a mount that names this spacing or a large-format plate rated above 54.7 lb.
| VESA pattern | 500 × 400 mm (19.69 × 15.75 in), non-standard |
|---|---|
| Weight without stand | 54.7 lb (55.1 lb with stand) |
| Screws | M6 |
| US model number | 75E7SF, 75E75SF, 75E75SFC, 75E7SFD, 75Q8SF, 75QD85SFM, 75QD8SF, 75QD8SFM, 75U60SF, 75U65SF, 75U65SFB, 75U65SFC, 75U6SFD |
| Model year | 2026, QLED Mini-LED LCD |
VESA and weight from Hisense's setup guide, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
Mounts that fit the E7SF 75"
Each one lists 500 × 400 mm, a rating above 54.7 lb and 75-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the E7SF 75"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 55 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
USX MOUNT Tilting TV Wall Mount for Most 37"-95" Flat Curved Screen Television
For the E7SF 75"
Covers almost every mainstream TV up to 95 inches and stays low-profile against the wall.
- Fits 37–95" screens
- Rated to 132 lb, your panel is about 55 lb
- Supports VESA up to 600 × 400 mm
$23.94
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 500 × 400 mm and 54.7 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 55 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear Corner TV Wall Mount Long Arm TV Mount Bracket for 37-75 Inch TVs
Listed for 500 × 400 mm and 54.7 lb
32 inches of extension with a 600 x 400 pattern, reaches out of a corner and still swings back flat.
- Fits 37–75" screens
- Rated to 100 lb, your panel is about 55 lb
- Supports VESA up to 600 × 400 mm
$59.97
See it on AmazonThe E7SF 75-inch against its lineup
Hisense lists the 2026 E7SF (QLED Mini-LED LCD) in 50, 55, 65, 75, 85 and 100 inches. 3 of the 14 Hisense 75-inch models from 2024 to 2026 in this research use 500 × 400 mm; the others use 600 × 400 (5) or 400 × 400 (4). 12 of them weigh more than this one. 54.7 lb is about 12% under the 62 lb typical of 75-inch panels, which leaves more brackets to choose from.
Screws, studs and height
Hisense lists M6 screws for the four holes. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are 19.7 in apart side to side, wider than 16-inch stud spacing, so a standard wall plate reaches a stud on each side.
With the center at 42 in for sofa seating, a 75-inch screen runs from about 24 in to 60 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other sizes of the E7SF
The E7SF changes pattern with size: 55" 300 × 200, 65" 400 × 300, 75" 500 × 400, 85" 600 × 400, 100" 800 × 400. Buy for the size you own.
| Size | VESA | Weight without stand |
|---|---|---|
| 55" | 300 × 200 mm | 27.6 lb (55E7SF) |
| 65" | 400 × 300 mm | 38.4 lb (65E7SF) |
| 85" | 600 × 400 mm | 66.1 lb (85E7SF) |
| 100" | 800 × 400 mm | 120.2 lb (100E7SF) |
Other TVs on 500 × 400 mm
Frequently asked questions
What VESA pattern does the E7SF 75" use?
VESA 500 × 400 mm: 500 mm between the holes side to side and 400 mm top to bottom (19.69 × 15.75 in), with M6 screws. That is from Hisense's setup guide, checked Sep 22, 2026.
How much does the E7SF 75" weigh?
54.7 lb without the stand and 55.1 lb with it. Bracket ratings are for the panel alone, so 54.7 lb is the number to shop against.
Can the E7SF 75" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 75 in and 54.7 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the E7SF mounted for you?
Mounting a 75-inch TV is $209 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Hisense models: all Hisense TVs by model · look up another TV