Samsung QLED QE1D 55-inch wall mount: VESA 200 × 200 mm, 34.2 lb
The Samsung QE1D 55-inch (QN55QE1DAFXZA) uses a VESA 200 × 200 mm pattern and weighs 34.2 lb without its stand. Any mount that lists 200 × 200 mm, is rated above 34.2 lb and covers 55-inch screens fits it.
| VESA pattern | 200 × 200 mm (7.87 × 7.87 in) |
|---|---|
| Weight without stand | 34.2 lb (34.8 lb with stand) |
| Screws | M8, 13 mm screw depth |
| US model number | QN55QE1DAFXZA |
| Model year | 2024, QLED |
VESA and weight from Samsung's installation guide, checked Sep 22, 2026. Measure your own TV's holes if the model number on its sticker differs.
This page also covers the 2024 Samsung Q60D 55-inch (QN55Q60DAFXZA, 34.2 lb) and 2024 Samsung DU8000 55-inch (UN55DU8000FXZA, 34.2 lb): Samsung lists the same 200 × 200 mm pattern and a weight within a pound, so the same mounts fit.
Mounts that fit the QE1D 55"
Each one lists 200 × 200 mm, a rating above 34.2 lb and 55-inch screens on its own spec sheet.
Checked against the size, weight and pattern above
Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV
For the QE1D 55"
Flush fixed plate that spans up to 32-inch stud spacing, useful when your studs are not where you want the TV.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 34 lb
- Supports VESA up to 800 × 400 mm
$35.99
See it on Amazon
Lowest current price of the mounts that fit
PERLESMITH Tilting TV Wall Mount for 23–60 inch TVs up to 115 lbs
For the QE1D 55"
Cheapest honest tilt bracket for a bedroom or small living-room TV mounted above eye level.
- Fits 23–60" screens
- Rated to 115 lb, your panel is about 34 lb
- Supports VESA up to 400 × 400 mm
$15.99
See it on AmazonPrices as of Sep 24, 2026, 10:05 AM EDT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. As an Amazon Associate, Express Mounting earns from qualifying purchases.
If it needs to tilt or swivel
Angles the screen down when it hangs above eye level
Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV
Listed for 200 × 200 mm and 34.2 lb
Advanced tilt: pulls 7 inches off the wall before it angles down, so you can reach the ports and get a real viewing angle from a high or above-fireplace position.
- Fits 42–90" screens
- Rated to 120 lb, your panel is about 34 lb
- Supports VESA up to 600 × 400 mm
$44.99
See it on Amazon
Pulls out and turns for corners and open rooms
Perlegear UL Listed Full Motion TV Wall Mount for 42-90" TVs up to 132lbs
Listed for 200 × 200 mm and 34.2 lb
Dual arms, tool-free tilt and swivel, UL-listed to 132 lb, the value pick we actually carry.
- Fits 42–90" screens
- Rated to 132 lb, your panel is about 34 lb
- Supports VESA up to 600 × 400 mm
$52.20
See it on AmazonThe QE1D 55-inch against its lineup
Samsung lists the 2024 QE1D (QLED) in 55, 65, 70, 75 and 85 inches. 29 of the 41 Samsung 55-inch models from 2024 to 2026 in this research use 200 × 200 mm; the others use 300 × 200 (10) or 400 × 300 (2). 13 of them weigh more than this one. 34.2 lb is close to the 33 lb typical of 55-inch panels, so size-rated brackets are in the right range; check the rating anyway.
The 2025 QEF1 55-inch keeps 200 × 200 mm at 23.8 lb. QEF1 55-inch mount page →
Screws, studs and height
Samsung lists M8 screws for the four holes and a 13 mm screw depth. Use the screws that match that thread from the bracket's kit, and stop if one bottoms out before the plate is tight: a spacer fixes that, force does not.
The holes are only 7.9 in apart side to side, less than the 16 in between studs. The mount's wall plate has to reach two studs on its own, so check its width, not just its VESA range.
With the center at 42 in for sofa seating, a 55-inch screen runs from about 29 in to 55 in off the floor. In a bedroom the center goes 42 to 50 in. The height calculator works it out for your own seat.
Other sizes of the QE1D
The QE1D changes pattern with size: 55" 200 × 200, 65" 400 × 300, 70" 400 × 300, 75" 400 × 400, 85" 600 × 400. Buy for the size you own.
| Size | VESA | Weight without stand |
|---|---|---|
| 65" | 400 × 300 mm | 46.1 lb (QN65QE1DAFXZA) |
| 70" | 400 × 300 mm | 62.8 lb (QN70QE1DAFXZA) |
| 75" | 400 × 400 mm | 69.2 lb (QN75QE1DAFXZA) |
| 85" | 600 × 400 mm | 91.5 lb (QN85QE1DAFXZA) |
Other TVs on 200 × 200 mm
- Samsung LS03HW 55", 33.1 lb
- Samsung Q70D 55", 35.5 lb
- Samsung QN80F 55", 36.2 lb
- Samsung LS03HE 55", 31.5 lb
- Samsung LS03FA 55", 37.3 lb
- Samsung Q80D 55", 37.7 lb
Every TV with a 200 × 200 pattern →
Frequently asked questions
What VESA pattern does the QE1D 55" use?
VESA 200 × 200 mm: 200 mm between the holes side to side and 200 mm top to bottom (7.87 × 7.87 in), with M8 screws. That is from Samsung's installation guide, checked Sep 22, 2026.
How much does the QE1D 55" weigh?
34.2 lb without the stand and 34.8 lb with it. Bracket ratings are for the panel alone, so 34.2 lb is the number to shop against.
Can the QE1D 55" hang on drywall without studs?
No. Drywall alone is for TVs up to about 32 in and 30 lb on rated toggle anchors. At 55 in and 34.2 lb it needs the bolts in studs, or masonry anchors in brick or concrete.
Want the QE1D mounted for you?
Mounting a 55-inch TV is $159 flat in all 13 metros we serve. The bracket is separate: bring your own, or add a flat mount for $69 or a full-motion mount for $79. Every install carries our 3-year workmanship warranty.
Get a free estimate →More Samsung models: all Samsung TVs by model · look up another TV