Wall Mounts for the Samsung OLED 4K S90F 55-inch

Mounting specification

Its 300 × 200 mm pattern is a standard VESA size, so any mount listing that spacing within its supported range bolts straight on. At 35.3 lb it sits in the mainstream weight band, so the field of compatible mounts is wide. Two lag bolts into a single stud hold it, though spanning two studs is always better.

That is within a few pounds of the 33 lb median for a 55-inch panel, so any bracket sized for this class is in the right ballpark. Being OLED changes how you move it more than how you mount it. 35.3 lb over 48 inches of width makes it deceptively easy to carry one-handed, and that is exactly how the panel gets flexed. Keep it vertical from the box to the bracket.

Where the bolts land relative to your studs

At only 11.8 inches across, this pattern is narrower than the 16 inches between studs, the TV's mounting holes sit between them. The mount's wall plate has to be wide enough to reach two studs, or you need a single-stud mount rated for the full panel weight.

So check the width of the mount's wall plate, not just its VESA range. Carrying 35.3 lb off a single stud needs a bracket explicitly rated for it.

Specification sourced from the manufacturer listing and cross-checked against published panel data . Measure your own mounting holes before buying if you want certainty for your exact unit.

How high to mount it

Centre of the screen at seated eye level, about 42 inches from the floor. On a 55-inch panel that is a bottom edge near 29 inches and a top edge near 55 inches (4' 7"), and it wants roughly 6.1 feet of viewing distance. That clears a normal console comfortably, so the wall itself is usually the binding constraint rather than the furniture.

The height calculator works this out for your own seating and eye height, and the fireplace planner covers the above-a-mantel case including heat clearance.

If you need to tilt it

Mounting above eye level, over a fireplace, a dresser or a tall console, means the screen should angle down toward you. These tilt mounts are rated for the S90F's pattern and weight.

If it needs to swivel

Corner installations, open-plan rooms and kitchens usually want an articulating arm. Bear in mind that a full-motion mount applies far more turning force to the wall than a fixed plate does, so at 35.3 lb these want solid framing rather than anchors.

What else the job needs

The two things that stall a Samsung install most often are hardware and cable length. Box hardware does not always include the right bolt for a specific panel, and the HDMI cable that reached the old stand rarely reaches once the TV is on the wall.

Other sizes of the S90F

The S90F does not use one pattern across the range. Your 55-inch is 300 × 200 mm, while the 48-inch is 300 × 200, the 65-inch is 300 × 200, the 77-inch is 400 × 300, the 83-inch is 400 × 300. A mount will not simply transfer between sizes here, so check the size you actually own.

Other TVs with the same 300 × 200 pattern

These take the same mounts, which is useful if you are buying one bracket for a house with several TVs.

• LG OLED B5 B5 55", 31.5 lb
• LG QNED 82A edge-lit QNED82A 55", 34.6 lb
• LG UHD UA70 UA7000 55", 25.4 lb
• LG UHD UA77 UA7700 55", 22.7 lb
• LG OLED evo C6 C6 55", 31.1 lb
• LG OLED evo G6 Gallery G6 55", 37 lb

Frequently asked questions