Skip to content
Same-Day Service · Free Estimates Text a photo

TV mounting services in Elk Grove Village, IL

Elk Grove Village TV mounting is flat-rate: $129 up to 54", $159 for 55-69", $209 for 70-79", $299 for 80-94", $399 for 95-inch and up (2 technicians). Cable concealment is $99 per TV, brick or stone adds $99. Same-day slots when booked before noon, and the installer usually arrives within 2-4 hours of your confirmation.

“Wonderful communication. Expert installation. On time and competitively priced!”
Ferber Buckley, Google review of an Atlanta install

Updated

A Samsung Frame TV with a white bezel and a soundbar mounted above a white mantel fireplace

Documented install, April 2025 By the Atlanta crew.

TV Mounting Cost Estimate

Step 1 of 520%
How big is the TV?
One TV.

Rather we call you?

Leave your number, and we call you about your TV, any day from 8:00 AM to 8:00 PM. Add a note on the wall or the TV if you like.

Contact Information

Helps us match you with the installer closest to you.

Elk Grove Village was planned whole. Centex laid it out as a complete community, the village incorporated in 1956, and the plan kept a large industrial park entirely apart from the houses. Centex then built most of those houses itself, ranches and colonials, between 1956 and 1987: first the original streets east of Route 53, then, in the 1970s, the neighborhoods west of it. Busse Woods forest preserve borders the village. The walls are drywall over wood stud, often behind brick veneer, with party walls in the townhomes and in condos converted from 1970s apartments. Your Express Mounting installer carries a stud finder, a magnet, 5/16-inch lag bolts, SnapToggles, and a hammer drill with 1/4-inch Tapcons for brick. Freeze-thaw winters matter for anything mounted outdoors. Same-day Elk Grove Village service when booked before noon.

What Express Mounting Customers Say

Google reviews of our Atlanta installs

These guys did an outstanding job installing 2 TVs for us. Highly recommend them for your TV mounting needs.

Angelina Pascar

Google review

AP
We called and requested a same day service and they were able to accommodate, even on a Friday. When our technician got here, he assessed our mounting ask in seconds and immediately got to work.

Kelly Bell

Google review

KB
Great service, thank you Alex

Aleksey Khusanov

Google review

AK

Look us up before you book

Express Mounting has one Google Business Profile, at our Alpharetta, GA headquarters. Customer reviews for every metro we serve live there.

Chicago installs are done by local installers we dispatch, on the same flat rates and the same warranty.

28 Google reviews, every one on that profile, from customers of the Atlanta crew.

Every booking comes with

  • 3-year workmanship warranty
  • Same-day installation when you book before noon
  • An installer typically arrives within 2-4 hours of confirmation

East of Route 53: original Centex ranches, and why every wall still gets tested

The first Elk Grove Village streets are the Centex streets east of Route 53, begun when the village incorporated in 1956. One builder put up most of the houses in town, ranch and colonial styles, and kept at it until 1987. That makes the starting wall easy to predict: drywall over wood stud. It does not make today's wall predictable. A house that has stood since the late 1950s may have had a kitchen opened up, a doorway closed or a room added, and a remodeled wall can be framed differently from the original beside it. So the installer treats each wall as unknown until tested. A stud finder marks the edges, a magnet picks up the fastener line, and a tape measure checks whether the spacing repeats. A 1/8-inch pilot confirms wood, and two 5/16-inch lag bolts per stud carry the bracket. One stud is enough to about 55 inches. Larger screens span two. Drywall alone holds nothing over about 32 inches or 30 pounds. A ranch install takes 45 to 60 minutes.

A TV mounted on a white shake-shingle wall under a vaulted wood porch ceiling

Centex colonials: the bedroom TV upstairs and the family-room wall below

Centex built colonials alongside its ranches, and a two-story house splits the work between floors. Upstairs it is bedrooms. A TV watched from bed hangs with its center 42 to 50 inches off the floor, and a tilt bracket angles it down a few degrees toward the pillow. The wall across from the bed is not always the wall with studs in the right place, so the installer finds the framing first and then shows where the screen can center. A dresser under the TV hides a cable box and can take the place of in-wall work. Getting there is part of the job. The box is measured against the stair and the turn at the top before it goes up, and a large panel comes out of its box downstairs if the turn is tight. On the first floor the family-room wall is drywall over wood stud. A full-motion arm, $59 or $79 if you need one of ours, lets one screen face the sofa and then turn toward the kitchen table.

A TV on an extended full-motion arm above a heavy timber mantel on a stone fireplace, under a vaulted ceiling

West of Route 53: family rooms, soundbars and split-level walls in the 1970s neighborhoods

In the 1970s Elk Grove Village developed the land west of the expressway, Route 53. Split-levels and townhomes belong to the village's mix of houses, and in both the main TV often ends up in a family room. That room is where a soundbar earns its place. Soundbar mounting is $79. The bar hangs a few inches under the screen, level with it, either on brackets that bolt to the TV mount and move with the panel or on its own two anchors in the wall. With a full-motion arm the first kind is the one to pick, so the sound turns with the picture. The signal runs over one HDMI eARC cable, and the installer sets the TV to send audio out and checks that the TV remote runs the volume. In a split-level's lower level, an outside wall can have concrete behind the drywall. A pilot hole answers it: wood means lag bolts at the base rate, and concrete means a hammer drill, 1/4-inch Tapcons and the +$99 masonry surcharge.

A TV and soundbar mounted on the drywall chimney breast above a white mantel

Condos converted from 1970s apartments: reading a party wall before the bracket goes on

Some of the apartment complexes built in Elk Grove Village during the 1970s have since been converted to condominiums. The floor plans stayed. So did the walls, and the wall with the best sightline can be one shared with the next unit. Nobody can tell from the paint what is inside it. The installer drills one 1/8-inch test hole behind where the screen will hang and reads the bit. Wood shavings: a stud wall, and 5/16-inch lag bolts with the pilot stopped short so nothing passes through the stud. A thin steel curl: metal stud, and SnapToggles through 1/2-inch holes, four for a fixed bracket, six for an arm. Grey dust: concrete block or other masonry, which takes 1/4-inch Tapcons and adds +$99. Wood and metal stud walls add nothing. If the test shows no framing where the bracket needs it, the mount shifts to the nearest studs or to an inside partition. Drilling is done in short bursts. A unit in a converted building has neighbors beside it and often above and below.

Condo association rules in Elk Grove Village: owners, renters and a mount that comes off cleanly

Condo associations write their own rules, and a converted building may have more of them than a house owner expects. We do not know what yours says. Read the declaration or call the management office and ask three things: whether an owner may drill into a wall shared with a neighbor, whether low-voltage cable may run inside any wall, and what hours work is allowed. If you rent the unit from its owner, get the owner's approval in writing as well. The install can be planned around almost any answer. Where in-wall cable is off the table, a paintable raceway at $79 carries the cables down the surface and comes off later with little more than a touch of paint. Where the shared wall is off limits, an inside partition takes the bracket. For a renter the installer keeps the hole count to what the bracket needs, four lag holes for most screens, placed where a patch will be simple. The flat rate does not move with the rules. Only the plan does.

The Busse Woods edge: patio TVs, brick veneer and freeze-thaw

Busse Woods forest preserve borders Elk Grove Village. For a house along that edge, or anywhere in the village, a TV on a covered patio is a different job from one in the family room. The set should be an outdoor-rated model, because an indoor panel is not built for damp air or for a Chicago-area winter. Check its manual for the lowest temperature it can be stored at. The wall is usually the outside of the house, and where that is brick veneer the mount is masonry work: a hammer drill, a 3/16-inch carbide bit and 1/4-inch Tapcons in the brick face or the mortar joint, whichever lines up with the mount holes, at +$99. Freeze-thaw is hard on mortar. Water gets into a joint, freezes, and loosens it over the years, so the installer scrapes each joint with an awl and moves any anchor that would land in soft mortar. Where the outside wall is not brick, the installer finds the studs behind it and seals each hole. Outdoor power is an electrician's work.

The residential side of a planned village: what one Elk Grove Village visit includes

Centex planned Elk Grove Village as a complete community and kept its large industrial park entirely separate from the residential side. The ranches, colonials, split-levels, townhomes and condos on that side all get one visit in one order. First the wall is read and the hardware chosen for it. Then the outline of the screen is taped up, and you look at it from your seat before a hole is drilled. The bracket is matched to the TV's VESA pattern and weight, fastened on a laser line, and checked for level again with the panel on it. Cables are concealed in the wall for $99 per TV where the wall and the rules allow. Elk Grove Village is its own town, not part of the City of Chicago, and a new outlet behind the screen is an electrician's work. Last comes setup: WiFi, inputs and picture mode on Samsung including the Frame, Sony, LG OLED, TCL or Hisense. A TV of 95 inches or more brings two technicians. Booked before noon, the visit is usually the same day.

Your Elk Grove Village price, before you book

Pick the TV's size, the wall and the mount, and the estimator shows the labor price, from $129 per TV. Then book a time online, or call from 8:00 AM to 8:00 PM.

Field notes from Elk Grove Village installs

Elk Grove Village came off one drawing board. Centex planned it as a complete community, the village incorporated in 1956, and Centex built most of the houses, ranches and colonials, between 1956 and 1987. The original streets lie east of Route 53. The land west of the expressway was developed in the 1970s, and some apartment complexes from that period are condominiums now. Busse Woods forest preserve borders the village, and the industrial park sits apart from the residential side.

Inside, the houses are drywall over wood stud: stud finder, magnet, pilot hole, 5/16-inch lag bolts. Brick veneer is an outside matter and only counts when a TV goes on the outside of the house.

The condos are where the installer slows down. A party wall in a converted building is tested with one small hole before the bracket is laid out, and the association’s rules are yours to check before booking. Freeze-thaw winters decide how an outdoor mount is anchored.

TV mounting prices in Elk Grove Village

Elk Grove Village rates are flat and go by the size of the TV: $129 up to 54”, $159 for 55-69”, $209 for 70-79”, $299 for 80-94”, $399 for 95” and up. In-wall cable concealment costs $99 per TV. A paintable raceway run on the wall costs $79. Only masonry is surcharged: brick, stone or concrete adds the published +$99. Drywall, plaster and metal stud do not. In Elk Grove Village the inside walls of a Centex ranch or colonial are base rate, and so is a condo party wall framed in wood or metal stud. The +$99 applies to a patio mount on brick veneer, a brick fireplace, or a condo or lower-level wall that proves to be block or concrete when tested. Brackets sit outside the labor rate. Bring one, or buy ours: $49 or $69 for a flat bracket, $59 or $79 for a full-motion arm. Mounting a soundbar is $79. Travel is never billed in Elk Grove Village.

How Express Mounting covers Elk Grove Village

Since 2015, when Alex Crabinsky started Express Mounting in Atlanta, the company has completed 9,747+ documented installs, and an Elk Grove Village job follows the process they produced. Elk Grove Village jobs run through vetted Cook County installers who carry the same hardware, work off the same install checklist, and back every job with the same 3-year workmanship warranty, held by Express Mounting. The installer we dispatch already knows a Centex stud wall, and knows that a converted condo’s party wall gets a test hole before it gets a bracket.

TV mounting and installation in Elk Grove Village, IL: common questions

What does a TV installation cost in Elk Grove Village?

One flat figure per TV, by screen size: $129 up to 54 inches, $159 for 55-69, $209 for 70-79, $299 for 80-94, $399 for 95 and up. Add $99 per TV for in-wall cable concealment. Brick veneer on a patio wall, a brick fireplace, or a condo wall that tests as block or concrete is masonry and adds +$99. Drywall over wood stud in a Centex ranch or colonial, metal stud and plaster carry no surcharge. The bracket is not in that figure: bring one or buy one of ours.

Are same-day openings available for TV mounting in Elk Grove Village?

Yes, for bookings made before noon, online or by phone at (470) 777-4077. An installer from our vetted Cook County network arrives within 2-4 hours of confirming a same-day request, east or west of Route 53.

My Elk Grove Village condo was a 1970s apartment. Will its party wall hold a TV?

In most cases, yes, once the installer knows what the wall is. One small test hole shows wood stud, metal stud or masonry. Wood takes lag bolts, metal stud takes SnapToggles, and block or concrete takes 1/4-inch Tapcons with the +$99 masonry surcharge.

Do I need my Elk Grove Village condo association's permission to mount a TV?

Possibly. Condo associations set their own rules and we do not know yours, so check with the association or management before booking. Ask about drilling into a shared wall, cable inside the wall and work hours. Renters should also have the unit owner's approval in writing. In a house you own, an indoor mount is up to you.

Who does the work at an Elk Grove Village address, and who holds the warranty?

An installer from our vetted Cook County network, dispatched by Express Mounting and working from the hardware list and install checklist built in Atlanta. The flat rate you are quoted is locked when you book. The 3-year workmanship warranty is held by Express Mounting, not by the individual installer.

Elk Grove Village ZIP code we cover

  • 60007

Not sure your address is in range? Text us your ZIP or address, or call (470) 777-4077.

Call (470) 777-4077 Text a photo

Text a photo of your wall

Point your phone's camera here to start a text to +14707774077. Add a photo of the wall and your TV's size, and we reply with your price and the first open time.

QR code that starts a text message to +14707774077
Use the quote form instead