TV mounting costs $100-$400 for professional installation in 2026, with the price driven by TV size, wall type, and add-ons rather than your zip code. A standard install on drywall runs about $149 for TVs up to 54 inches, $199 for 55-69 inches, $259 for 70-79 inches, and $319 for 80 inches and up. The common add-ons are in-wall cable concealment (about $119 per TV), a masonry surcharge for brick or stone (around $119), and a full-motion mount upcharge (around $89). After 7,874 documented installs across Metro Atlanta, Miami, and Los Angeles, the single biggest swing in any quote is the wall: drywall is the cheap case, brick and stone are not.
Quick note: This page contains Amazon affiliate links. We may earn a small commission at no extra cost to you if you buy through them. Recommendations come from products I’ve personally hung on real customer walls over 10 years and 7,874 installs - not spec-sheet guessing.
“How much does it cost to mount a TV?” is the first question I get on almost every call. The honest answer is that the labor is more predictable than most homeowners expect, but the total depends on four things: the size and weight of the TV, the wall you’re drilling into, the mount you choose, and whether you want the cables hidden. Below is the actual flat-rate math I quote, plus how the national market compares so you know whether a quote is fair.
On this page
- National average TV mounting cost
- Cost by TV size
- Cost by wall type
- Add-on costs (cable concealment, mounts, masonry)
- Cost by city: Atlanta, Miami, Los Angeles
- DIY vs professional cost
- How to get an exact number
- Frequently asked questions
National average TV mounting cost {#national-average}
Across the US, professional TV mounting lands in a $100-$400 range for a typical residential job. National platforms and handyman marketplaces quote a base “mount only” fee around $69-$150, then layer on charges for size, height, cable hiding, and wall type - which is where the final number climbs.
The flat-rate model I use removes the guesswork. The base install covers wall assessment, stud finding, professional mounting hardware appropriate to the wall, a level install, and cleanup. Everything beyond that is an itemized add-on, so the quote you hear on the phone is the quote you pay.
Cost by TV size {#cost-by-size}
TV size is the primary driver because bigger panels need higher-capacity brackets, more studs, and a two-person lift. Here is the flat-rate structure:
| TV size | Typical weight | Standard install (drywall) |
|---|---|---|
| Up to 54” | 25-45 lbs | $149 |
| 55-69” | 45-70 lbs | $199 |
| 70-79” | 70-100 lbs | $259 |
| 80” and up | 100-150 lbs | $319 |
For TVs 85 inches and larger, the install often needs three studs and a plywood backer plate - the details are in our heavy-duty TV mounting guide. The bracket itself is a separate cost if you want us to supply it; most customers save $20-40 buying their own (see the picks in our best TV wall mount guide) and having us install it.
Cost by wall type {#cost-by-wall-type}
The wall is the biggest variable in any quote. The same 65-inch TV can be a flat $199 job or a $318 job depending on what’s behind the drywall:
- Drywall over wood studs - the standard, no surcharge. About 80% of homes. Lag bolts into the studs and you’re done.
- Brick, stone, or concrete - add roughly $119. These need a hammer drill, carbide bits, and Tapcon anchors, and the work is slower. Details in our brick vs stone veneer guide.
- Plaster-and-lath (pre-1955 homes) - usually no surcharge, but it takes longer and a careless drill cracks the plaster. See finding studs behind plaster.
- Metal studs (condos and high-rises) - typically no surcharge, but the hardware changes to toggle anchors. Our metal stud guide covers the weight limits.
If you don’t know your wall type, that’s fine - it’s the first thing the installer checks on arrival, and the full process is laid out in our how to mount a TV guide.
Add-on costs {#add-ons}
Add-ons are where two quotes for “the same job” diverge. The common ones:
| Add-on | Typical cost | Notes |
|---|---|---|
| In-wall cable concealment | $119 per TV | A code-compliant in-wall power kit, fully recessed. See our in-wall cable guide. |
| Full-motion mount upcharge | about $89 | Articulating arms take longer to install and level |
| Masonry surcharge | about $119 | Brick, stone, or concrete walls |
| Soundbar install | about $99 | Mounted and aligned below the TV |
| Travel beyond core radius | about $59 | Outside the standard 25-mile service area |
A full-motion mount and a basic stud finder are the two purchases that change a quote the most - the mount because it adds labor, the stud finder because it’s the tool DIYers most often skip and then regret.
Cost by city: Atlanta, Miami, Los Angeles {#cost-by-city}
One thing that surprises people: TV mounting labor does not swing much by metro. The flat-rate pricing above is the same whether the install is in Atlanta, Miami, or Los Angeles. What changes between markets is rarely the labor rate and more often the wall mix - Miami’s older buildings have a lot of concrete block and CBS construction that triggers the masonry surcharge, and many LA hillside homes have the same. Coastal markets also see more outdoor and balcony installs that need weatherproof hardware.
For metro-specific breakdowns, see our Miami TV mounting cost guide (concrete-block walls and high-rises) and our Los Angeles cost guide (seismic hardware and lath-and-plaster homes).
DIY vs professional cost {#diy-vs-pro}
A DIY mount can cost as little as the price of a bracket ($30-$120) plus a few tools you may already own. The professional fee buys three things a DIY job usually can’t: the right anchor matched to your specific wall, a guaranteed-level install, and a pull test rated to twice the TV’s weight before anyone walks away.
The math that flips people toward a pro: a $40 wrong-anchor mistake on a 65-inch TV can become a $400 drywall repair plus a cracked screen. If the TV cost more than $1,000 or weighs over 60 lbs, the install fee is cheap insurance. If you do want to tackle it yourself, our how to mount a TV guide and DIY wizard walk through every step.
How to get an exact number {#exact-quote}
Flat-rate pricing means you can usually get an exact figure before anyone shows up. Two ways to do it:
- Use the TV mounting price estimator - enter your TV size, wall type, and add-ons and it returns the same number my crew quotes on the job.
- Check the full pricing page or call (470) 777-4077 for a same-day quote.
No deposit, no surprise add-ons on arrival. The estimate you get is the estimate you pay unless you add services on-site (for example, deciding to hide the cables after we arrive).
Frequently asked questions {#frequently-asked-questions}
How much does it cost to mount a TV?
Professional TV mounting typically costs $100-$400 in 2026. A standard drywall install is about $149 for TVs up to 54 inches, $199 for 55-69 inches, $259 for 70-79 inches, and $319 for 80 inches and up. Add-ons like in-wall cable concealment (about $119) and a masonry surcharge for brick or stone (about $119) are itemized separately.
Is it cheaper to mount a TV yourself?
The hardware for a DIY mount runs $30-$120 plus tools, so it is cheaper up front. The risk is using the wrong anchor for your wall, which can pull a large TV out of the drywall and turn a $40 mistake into a $400 repair plus a damaged screen. For TVs over $1,000 or 60 lbs, professional installation is usually the better value.
Why does cable concealment cost extra?
In-wall cable concealment (about $119 per TV) uses a code-compliant in-wall power relocation kit and low-voltage routing so the cables disappear completely. It takes 30-45 minutes of extra work, including cutting and finishing the drywall. Running a standard power cord inside the wall violates NEC code, which is why a proper kit is required.
Does TV mounting cost more for a large TV?
Yes. Larger TVs need higher-capacity brackets, more studs, and a two-person lift, so the install fee scales with size: roughly $149 (up to 54”), $199 (55-69”), $259 (70-79”), and $319 (80”+). TVs 85 inches and up may also need a plywood backer plate.
Does the price change between cities like Atlanta, Miami, and LA?
The labor pricing is the same flat rate across Atlanta, Miami, and Los Angeles. The total can differ because of the wall mix - Miami and coastal markets have more concrete block construction that triggers the masonry surcharge - but the base install fee does not change by metro.
About the author
I’m Alex Crabinsky, founder of Express Mounting. Since 2015 I’ve personally documented 7,874 TV installs across Metro Atlanta, plus dispatch coverage in Miami and Los Angeles. The pricing here is the same flat rate my crew quotes on every job - no upsells, no surprise add-ons. Ready for a number? Get a free estimate or call (470) 777-4077.