Skip to content
Same-Day Service · Free Estimates Text a photo

TV mounting services in Glen Ellyn, IL

Glen Ellyn TV mounting is flat-rate: $129 up to 54", $159 for 55-69", $209 for 70-79", $299 for 80-94", $399 for 95-inch and up (2 technicians). Cable concealment is $99 per TV, brick or stone adds $99. Same-day slots when booked before noon, and the installer usually arrives within 2-4 hours of your confirmation.

“We called and requested a same day service and they were able to accommodate, even on a Friday.”
Kelly Bell, Google review of an Atlanta install

Updated

Two TVs mounted side by side on a gray basement wall over a wood-look floor

Documented install, April 2025 By the Atlanta crew.

TV Mounting Cost Estimate

Step 1 of 520%
How big is the TV?
One TV.

Rather we call you?

Leave your number, and we call you about your TV, any day from 8:00 AM to 8:00 PM. Add a note on the wall or the TV if you like.

Contact Information

Helps us match you with the installer closest to you.

Glen Ellyn had taken its name by 1889, the year the village made Lake Ellyn, and the houses around the lake and near downtown along Main Street date from the 1890s through the 1920s, when the village became a popular move for Chicago residents. American Foursquares and Craftsman houses from those years are plaster-and-lath. Cape Cods and post-war houses in south Glen Ellyn toward Butterfield Road are drywall over wood stud, and so are the newer custom houses built on older lots. Your Express Mounting installer carries a magnet and 5/16-inch lag bolts for studs, SnapToggles for small sets on drywall, and a hammer drill with 1/4-inch Tapcons for brick and stone chimney breasts. Basement walls get a damp check, because freeze-thaw cracks foundations. Same-day Glen Ellyn service when booked before noon.

What Express Mounting Customers Say

Google reviews of our Atlanta installs

They did an amazing job. Very quick and professional. Was on time and communicated every step of the way.

Nick

Google review

N
Professional and they do good work. Would recommend.

Alex Black

Google review

AB
They were very professional, neat, and completed my complex job in a timely manner. They also had great communication with setting up the appointment. Would use them again.

Alex B.

Google review

AB

Look us up before you book

Express Mounting has one Google Business Profile, at our Alpharetta, GA headquarters. Customer reviews for every metro we serve live there.

Chicago installs are done by local installers we dispatch, on the same flat rates and the same warranty.

28 Google reviews, every one on that profile, from customers of the Atlanta crew.

Every booking comes with

  • 3-year workmanship warranty
  • Same-day installation when you book before noon
  • An installer typically arrives within 2-4 hours of confirmation

Around Lake Ellyn: 1890s-1920s houses, and why the stud finder stays in the bag

The village made Lake Ellyn in 1889 and had taken the name Glen Ellyn by then. The houses that followed, around the lake and near downtown, date from the 1890s through the 1920s, and Lake Ellyn Park still sits in an established residential area. Every one of those decades means plaster-and-lath. Behind the paint is a hard coat of plaster, then rows of wood lath, then the studs. An electronic stud finder sees the lath as one unbroken sheet of wood and reports a stud everywhere. So it stays in the bag. The installer we dispatch uses a magnet, which finds the small nails fixing lath to stud, and follows them up the wall until they form a line. A line of nails is a stud. Switch and outlet boxes help too, because each is fastened to the side of one. The find is then proven with a 1/8-inch pilot hole placed where the bracket will cover it. Nothing is drilled on a guess, and nothing is hung on lath or plaster alone. The load belongs in the studs.

A TV on a full-motion arm swung out from a white wall beside crown molding

American Foursquares: drilling plaster cleanly, upstairs and down

The American Foursquare is one of Glen Ellyn's pre-war house types, with plaster rooms on both floors. Once the studs are found, the work on a Foursquare wall is about not marking the plaster. The bracket holes are laid out on painter's tape, which holds the finish coat together at the edge of each hole. A small masonry bit opens the plaster with the drill in plain rotation at low speed, because hammer action shakes plaster loose from its lath. A wood bit then pilots the stud, and a 5/16-inch lag bolt follows. It is turned by hand at the end until the bracket sits flat, and it stops there. One more quarter turn can crack plaster around the plate. A vacuum held at the bit keeps the dust off the floor. For a second-floor bedroom, the screen center goes 42 to 50 inches off the floor for viewing from bed, and the box is checked for fit on the stair and at the landing before it goes up. A plaster wall adds time, not money.

A TV in Art Mode showing a pastel sky on a gray wall

Craftsman houses: brick and stone chimney breasts, and where an anchor can go

Craftsman houses are part of Glen Ellyn's pre-war stock, and brick and stone chimney breasts are the masonry walls an installer meets here. The two are not drilled alike. Brick is regular, so the bracket can be shifted until its holes fall on good material, and each 1/4-inch Tapcon goes into the brick face or the mortar joint, whichever lines up with the mount holes. Stone is irregular. The face is uneven, and a bracket laid across it can rock. On stone the installer anchors in the mortar joints between stones and shims the wall plate until it sits plumb and does not move. Either way a hammer drill and a 3/16-inch carbide bit make the holes, with each anchor at least an inch into solid material, four for a fixed bracket and six for an arm. If the fireplace works, heat is checked first: the fire is lit for half an hour, then an infrared thermometer is pointed at the wall above the mantel. Above about 100°F the TV moves higher or to another wall. Brick and stone are masonry at +$99.

A Samsung Frame TV in Art Mode with a soundbar beneath it above a rustic brick fireplace with a dark wood mantel

A new house on an old Glen Ellyn lot: drywall even where the street is plaster

Glen Ellyn has newer custom houses built on older lots, so the age of a street says little about the wall in front of you. A house from the 1920s and one finished a few years ago can share a lot line. The newer one is drywall over wood stud, and it is the faster job. An electronic stud finder works on it, a magnet double-checks it at the fasteners, and a 1/8-inch pilot hole has to bring out solid wood before any lag bolt goes in. What the installer looks for in a newer wall is what else is in it. A steel nail plate on a stud marks a pipe or cable passing through, and that spot is left alone. Blocking between studs can stop a cable drop, so the bay is checked before in-wall concealment at $99 per TV is promised. A 75-inch panel hangs on four lag bolts across two studs, and an 85-inch goes on a wide bracket that reaches three. At 95 inches and up, two technicians do the lift, which is part of that band's price.

Cape Cods and post-war houses toward Butterfield Road: choosing the bracket for a drywall wall

South Glen Ellyn toward Butterfield Road is where the post-war houses are, Cape Cods among them. Their walls are drywall over wood stud, so the questions here are about the bracket more than the wall. A fixed bracket holds the screen close and suits a wall you face straight on. A tilt bracket takes glare off a screen hung a little high. A full-motion arm lets a TV in a corner turn toward the sofa, and it puts the most pull on the wall, so its plate goes on two studs with four 5/16-inch lag bolts and never on toggles. SnapToggles have their place: a light set, no bigger than about 32 inches and no heavier than about 30 pounds, where no stud falls in the right spot. Whichever type you pick has to match the TV's VESA pattern and weight. The bracket is a separate line from labor, your own or one of ours, with ours at $49 or $69 for a flat one and $59 or $79 for one with full motion.

DuPage County, not Chicago: power behind a Glen Ellyn TV and what concealment covers

Glen Ellyn is a village in DuPage County. It sits outside Cook County, so it follows the NEC and not the City of Chicago Electrical Code, which requires wiring in metal conduit. A new outlet behind the screen is still line-voltage work, and it is an electrician's job in Glen Ellyn as it is anywhere. The installer does the low-voltage side. In-wall concealment at $99 per TV runs HDMI, network and speaker cable through the stud bay from behind the screen to a plate near the floor. The TV's own power cord is not put inside the wall. It reaches an outlet the electrician has set behind the screen, or it drops in a paintable raceway on the surface for $79. If you plan to have an outlet added, book the electrician first and tell us where the box will be, so the bracket and the cable plate are laid out around it. In a plaster-and-lath wall the openings are cut slowly with an oscillating tool, and a bay with blocking gets a raceway instead.

Glen Ellyn basements: the framed wall, the foundation wall and the damp check

Glen Ellyn's two hazards, freeze-thaw and basement moisture, apply everywhere from Stacy's Corners, the old crossroads on the north side of the village, to the houses in the south. A finished basement has two kinds of wall, and they look identical once painted. Partitions put up to divide the space are wood framing and take lag bolts at the base rate. The perimeter is the foundation, covered with drywall or paneling on furring strips. A knock tells part of it, and a small test hole tells the rest. On the foundation a hammer drill takes the hole through the covering, and 1/4-inch Tapcons are driven into the poured foundation or foundation block behind. That is masonry at +$99. The damp check comes before either. Winters open fine cracks in a foundation and spring meltwater comes through them, leaving a white crust on the wall, rust on the furring nails or a swollen baseboard. A wall with those signs does not get a television. A dry partition a few feet away usually does, and the cables are kept off the floor.

Your Glen Ellyn price, before you book

Pick the TV's size, the wall and the mount, and the estimator shows the labor price, from $129 per TV. Then book a time online, or call from 8:00 AM to 8:00 PM.

Field notes from Glen Ellyn installs

Glen Ellyn’s older houses gather around Lake Ellyn, which the village made in 1889, and near downtown, which runs along Main Street on both sides of the railroad tracks. They date from the 1890s to the 1920s, the decade the village became a popular move for Chicago residents: American Foursquares and Craftsman houses with plaster-and-lath walls. South Glen Ellyn toward Butterfield Road is post-war, Cape Cods among it, and drywall over wood stud. Newer custom houses on older lots put both walls on one street.

Plaster gets a magnet, tape, a slow drill and lag bolts snugged by hand. Drywall gets a stud finder, a pilot hole and the same lag bolts. Brick and stone chimney breasts get a hammer drill and Tapcons after a heat check.

The hazard is underground. Freeze-thaw cracks foundations and moisture follows, so a basement wall is checked for damp before it is drilled. And because Glen Ellyn is in DuPage County, an outlet behind the TV is NEC work for an electrician, not Chicago conduit work.

TV mounting prices in Glen Ellyn

Glen Ellyn TV mounting is priced by the screen, never by the hour: $129 up to 54”, $159 for 55-69”, $209 for 70-79”, $299 for 80-94”, $399 for 95” and up. Add $99 per TV to have the cables concealed in the wall. The surface option, a paintable raceway, is $79. The published +$99 masonry surcharge applies to brick, stone and concrete. Plaster, drywall and metal stud are not surcharged. For Glen Ellyn that means a plaster wall in a Lake Ellyn Foursquare and a drywall wall in a post-war Cape Cod cost the same, and the surcharge shows up only on a brick or stone chimney breast or a basement foundation wall. The bracket is extra: bring your own, or take one of ours at $49 or $69 flat and $59 or $79 full-motion. A soundbar install is $79. Travel to Glen Ellyn is never charged.

How Express Mounting covers Glen Ellyn

Alex Crabinsky founded Express Mounting in Atlanta in 2015. The 9,747+ documented installs since then are where the Glen Ellyn routine comes from. Glen Ellyn jobs run through vetted DuPage County installers who carry the same hardware, work off the same install checklist, and back every job with the same 3-year workmanship warranty, held by Express Mounting. The installer we dispatch already knows that plaster by the lake and drywall in a rebuilt house call for different first steps and the same lag bolt.

TV mounting and installation in Glen Ellyn, IL: common questions

Is TV mounting in Glen Ellyn priced by the hour?

No. It is a flat rate by screen size: $129 up to 54 inches, $159 for 55-69, $209 for 70-79, $299 for 80-94, $399 for 95 and up. In-wall cable concealment is $99 per TV. A brick or stone chimney breast or a basement foundation wall counts as masonry, +$99. Plaster in the pre-war houses, drywall in the post-war and rebuilt ones, and metal stud carry no surcharge. The bracket is a separate line, yours or ours.

How fast can an installer get to Glen Ellyn?

Book before noon, online or by phone at (470) 777-4077, and it is the same day. An installer from our vetted DuPage County network arrives within 2-4 hours of confirming a same-day request, whether you are by Lake Ellyn, downtown on either side of the tracks, at Stacy's Corners or in south Glen Ellyn.

Can you mount a TV on a stone chimney breast in a Glen Ellyn Craftsman?

Yes. On stone the installer sets 1/4-inch Tapcons in the mortar joints with a hammer drill and shims the bracket so it sits plumb on the uneven face. A working fireplace gets a heat check first. Stone is masonry, so the +$99 surcharge applies.

Does Glen Ellyn use Chicago's conduit rule for an outlet behind the TV?

No. Glen Ellyn is in DuPage County, outside Cook County, and follows the NEC. The City of Chicago Electrical Code, which requires wiring in metal conduit, applies inside that city. A new outlet is an electrician's work either way. Our $99 in-wall concealment covers low-voltage cable only.

How big a TV can a plaster wall in a Lake Ellyn Foursquare carry?

The plaster does not set the limit, because it carries none of the weight. The lag bolts go into the wood studs behind it. A 75-inch panel hangs on four 5/16-inch lag bolts across two studs, and a wider bracket reaches a third stud for an 85. Screens of 95 inches or more come with two technicians.

Glen Ellyn ZIP codes we cover

  • 60137
  • 60138

Not sure your address is in range? Text us your ZIP or address, or call (470) 777-4077.

Call (470) 777-4077 Text a photo

Text a photo of your wall

Point your phone's camera here to start a text to +14707774077. Add a photo of the wall and your TV's size, and we reply with your price and the first open time.

QR code that starts a text message to +14707774077
Use the quote form instead