Skip to content
Same-Day Service · Free Estimates Text a photo

TV mounting services in Lincoln Square, IL

Lincoln Square TV mounting is flat-rate: $129 up to 54", $159 for 55-69", $209 for 70-79", $299 for 80-94", $399 for 95-inch and up (2 technicians). Cable concealment is $99 per TV, brick or stone adds $99. Same-day slots when booked before noon, and the installer usually arrives within 2-4 hours of your confirmation.

“We called and requested a same day service and they were able to accommodate, even on a Friday.”
Kelly Bell, Google review of an Atlanta install

Updated

A Samsung Frame TV with a bronze bezel in a dark-painted alcove above a white mantel and marble surround, built-ins on both sides

Documented install, February 2025 By the Atlanta crew.

TV Mounting Cost Estimate

Step 1 of 520%
How big is the TV?
One TV.

Rather we call you?

Leave your number, and we call you about your TV, any day from 8:00 AM to 8:00 PM. Add a note on the wall or the TV if you like.

Contact Information

Helps us match you with the installer closest to you.

Lincoln Square is five places under one name: Ravenswood, Ravenswood Manor, Ravenswood Gardens, Bowmanville and Budlong Woods, with Giddings Plaza on Lincoln Avenue and the CTA Brown Line serving the neighborhood. Most of it was built from the 1890s through the 1920s as brick two-flats, three-flats, courtyard buildings, Chicago bungalows and frame houses. Rooms are divided by plaster-and-lath over wood stud. Exterior and party walls are common brick. Gut rehabs have drywall. Your Express Mounting installer brings a rare-earth magnet and 5/16-inch lag bolts for the stud walls, a hammer drill, 3/16-inch carbide bits and 1/4-inch Tapcons for the brick, and a stud finder for rehab drywall. Chicago's conduit code governs the wiring, and freeze-thaw mortar is tested before it is trusted. Same-day Lincoln Square service when booked before noon.

What Express Mounting Customers Say

Google reviews of our Atlanta installs

Best service experience! On time, very knowledgeable and experienced and fair price. Highly recommend.

Laurel Turk

Google review

LT
Appreciate such a quick availability after the order placement, definitely recommend, great job.

Andrei Luncas

Google review

AL
Excellent service. Arrived on time. Did everything top-notch. Highly recommend for all your TV mounting needs.

Oleg Pascari

Google review

OP

Look us up before you book

Express Mounting has one Google Business Profile, at our Alpharetta, GA headquarters. Customer reviews for every metro we serve live there.

Chicago installs are done by local installers we dispatch, on the same flat rates and the same warranty.

28 Google reviews, every one on that profile, from customers of the Atlanta crew.

Every booking comes with

  • 3-year workmanship warranty
  • Same-day installation when you book before noon
  • An installer typically arrives within 2-4 hours of confirmation

Ravenswood to Budlong Woods: the parts of Lincoln Square and the walls inside them

Lincoln Square is a neighborhood made of smaller ones: Ravenswood, Ravenswood Manor, Ravenswood Gardens, Bowmanville and Budlong Woods. They were not all built at once, and the walls show it. Bowmanville is brick two-flats, three-flats and vintage courtyard buildings from the early 20th century. Budlong Woods has mid-century houses. Across the neighborhood, the housing of the 1890s through the 1920s is two-flats, three-flats, courtyard buildings, Chicago bungalows and frame houses. For a TV that comes down to three walls. Plaster-and-lath over wood stud divides the rooms, and a mount there hangs on lag bolts in the studs. Common brick forms the exterior and party walls, and a mount there hangs on Tapcons set with a hammer drill. Drywall shows up wherever a building has had a gut rehab, and it behaves like any modern wall. A mid-century house can be plaster or drywall, depending on its year and on what has been redone since. The installer does not guess from the address. A magnet pass and one small pilot hole behind the TV spot name the wall, and the hardware follows from that.

A TV mounted on an artificial-greenery accent wall above a black mantel and black brick fireplace

The common brick side wall in a two-flat: Tapcons, old mortar and freeze-thaw

In a Lincoln Square two-flat or three-flat the exterior and party walls are common brick, plastered on the room side. When the TV belongs on one of those walls, studs are out of the picture and the brick does the holding. The installer starts with a 3/16-inch carbide bit in plain rotation and switches the hammer action on once the bit touches brick. Depth is read off the bit: so much plaster, then brick. The 1/4-inch Tapcon is picked to reach at least an inch past the plaster. Behind plaster nobody can see the coursing, so an anchor may land in the brick face or the mortar joint, whichever lines up with the mount holes. Freeze-thaw is why that gets checked. Chicago winters work water in and out of old joints, and a bit that drops through with no resistance has found mortar gone soft. That hole is abandoned, the bracket slides along its slots, and the anchor goes where the bit meets firm material. Brick is masonry, so +$99 applies. Allow 75 to 100 minutes.

A TV on a flat mount on a gray wall next to a whitewashed dresser

Bowmanville courtyard buildings: renters, owners and apartment walls

Bowmanville's vintage courtyard buildings date from the early 20th century, and they are apartment living: many households under one roof, with a neighbor on the other side of a wall. A TV install there starts with getting the basics agreed. If you rent, ask the owner or the management company first and get the yes in writing. A fixed bracket is the easy request, since it leaves four small holes that fill and paint over at move-out. If you own the unit, check whether your association has a rule on contractors. Then the wall. The partitions between rooms are plaster-and-lath over wood stud, which means lag bolts and the base rate. The outside wall and the wall shared with the next apartment are common brick, which means Tapcons and the masonry surcharge. When either would work, the partition is the simpler choice, and it keeps the drilling off the neighbor's side. Tell us the floor and whether there is an elevator when you book, so a large box is planned for. Most apartment installs take 60 to 80 minutes.

A TV on a gray bedroom wall, a plant in the corner by the window

Gut-rehabbed two-flats and three-flats: drywall up front, common brick still behind

Where a Lincoln Square two-flat or three-flat has had a gut rehab, the plaster is gone and drywall hangs in its place. A stud finder works on drywall, and a magnet confirms each stud by the line of screws over it. Then a 1/8-inch pilot hole says what the stud is made of. Pale wood shavings call for 5/16-inch lag bolts. Thin silver curls mean steel framing, and SnapToggles go in through a 1/2-inch hole. Drywall with nothing behind it holds only a small set, up to about 32 inches and 30 pounds on rated toggles, so anything larger is fastened to framing. The brick did not go anywhere, though. On an exterior or party wall the rehab drywall sits on furring strips or a framed wall in front of the common brick. A TV there is lagged into that framing if the pilot shows real studs, or anchored through to the brick with longer Tapcons at the masonry rate. Rehab stud walls also make in-wall cable concealment simple, at $99 per TV. Count on 45 to 70 minutes.

Chicago bungalows and frame houses: wood studs behind plaster-and-lath, foundation walls downstairs

Lincoln Square has Chicago bungalows and frame houses as well as flats, and Budlong Woods adds mid-century houses. In a frame house every wall has wood studs behind the plaster-and-lath. In a bungalow the room partitions do, and the brick outside walls get tested like any other brick. Finding a stud under plaster takes patience more than equipment. Electronic stud finders read the lath and give up. A rare-earth magnet dragged slowly across the wall sticks where lath nails run up a stud. An outlet or switch box is another clue, since it is fixed to the side of one. Spacing in a house this old can wander, so each stud is located on its own. Plaster and lath together are close to an inch thick, which is why the lag bolts are longer here than on drywall: 5/16 by 3-1/2 inches, so enough thread ends up in the wood. A finished basement is a separate question. A framed wall with drywall takes lags at the base rate. A bare poured foundation or foundation block wall is masonry, anchored with Tapcons at +$99.

EMT in the wall: the Chicago Electrical Code and cable concealment in Lincoln Square

Lincoln Square is inside the City of Chicago, so the Chicago Electrical Code governs its wiring, and that code requires metal conduit. NM cable, the plastic-jacketed kind common elsewhere, is not allowed in the city. Two things follow for a TV. First, adding an outlet behind the screen is an electrician's job, piped in EMT. Second, there is steel pipe inside these walls, and it matters where it runs. Before a low-voltage opening is cut, the installer sweeps the stud bay with a magnet, which picks up conduit as readily as nails. In-wall concealment, $99 per TV, carries HDMI, optical and speaker cable from behind the panel down to the console. In a plaster-and-lath partition the two openings are cut with an oscillating tool at low speed. If a fish tape hits a wood block partway down the bay, the route is changed, not forced. A common brick wall has no bay at all. On brick the cable goes in a paintable raceway for $79, and the power cord follows it to the nearest outlet.

Lake-effect winters and install day: cold panels, plaster dust and the final look

Lincoln Square gets lake-effect winters, and they change a visit in small ways. A TV that spent the morning in a delivery truck or on an unheated porch is left to reach room temperature before it is switched on, because cold glass and electronics collect condensation in a warm room. Boots get covered, and a drop cloth goes under the work, since road salt and plaster dust are both hard on a floor. The installer we dispatch comes to the blocks around Giddings Plaza on Lincoln Avenue the same way as to Ravenswood Manor or Budlong Woods: with the full kit, because the wall is unknown until tested. The bracket is extra, yours or ours, $49 or $69 for a flat mount and $59 or $79 for full-motion by screen size. Height is set from where you sit. A bedroom TV watched from bed centers 42 to 50 inches off the floor. Level is checked twice. Then WiFi, inputs and a soundbar over HDMI eARC. Samsung including the Frame, Sony, LG OLED, TCL and Hisense are routine.

Your Lincoln Square price, before you book

Pick the TV's size, the wall and the mount, and the estimator shows the labor price, from $129 per TV. Then book a time online, or call from 8:00 AM to 8:00 PM.

Field notes from Lincoln Square installs

Lincoln Square reads as one neighborhood on a map and as five on the ground: Ravenswood, Ravenswood Manor, Ravenswood Gardens, Bowmanville and Budlong Woods. Most of the housing is from the 1890s through the 1920s. Brick two-flats, three-flats and courtyard buildings, Chicago bungalows, frame houses. Budlong Woods came later, with mid-century houses.

Walls between rooms are plaster-and-lath over wood stud, and a TV there hangs on lag bolts in studs found by magnet. Exterior and party walls are common brick, and a TV there hangs on Tapcons set with a hammer drill. Gut rehabs swapped plaster for drywall, where a stud finder works and the pilot hole tells wood from steel.

Three local conditions shape the visit. Freeze-thaw softens old mortar, so the bit tests it before an anchor is trusted. Lake-effect winters mean a cold panel warms up before power. And Chicago’s conduit code leaves a new outlet to an electrician, with our concealment limited to low-voltage cable.

TV mounting prices in Lincoln Square

A Lincoln Square quote is one number, set by screen size: $129 up to 54”, $159 for 55-69”, $209 for 70-79”, $299 for 80-94”, $399 for 95” and up. Add $99 per TV if you want the cables run inside the wall, or $79 for a paintable raceway on the surface. Brick, stone and concrete carry the published +$99 masonry surcharge, and plaster, drywall and metal stud carry no surcharge at all. Mount on a plaster-and-lath partition or on rehab drywall and the base rate is the whole labor price. Mount on the common brick of an exterior or party wall, or on a basement foundation wall, and the surcharge applies. The bracket is not part of either figure. Bring one, or take ours for $49 or $69 flat and $59 or $79 full-motion. Soundbar install $79. No travel fee anywhere in Lincoln Square.

How Express Mounting covers Lincoln Square

Alex Crabinsky opened Express Mounting in Atlanta in 2015, and after 9,747+ documented installs the steps for a Lincoln Square two-flat are written down, not improvised. Lincoln Square jobs run through vetted Cook County installers who carry the same hardware, work off the same install checklist, and back every job with the same 3-year workmanship warranty, held by Express Mounting. The installer we dispatch already knows which wall in a two-flat is common brick, which is plaster-and-lath, and what a gut rehab changes.

TV mounting and installation in Lincoln Square, IL: common questions

What does it cost to mount a TV in Lincoln Square?

The rate is flat and set by screen size: $129 up to 54 inches, $159 for 55-69, $209 for 70-79, $299 for 80-94, $399 for 95 and up. Cables hidden inside the wall are $99 per TV. A mount anchored into a common brick exterior or party wall adds the +$99 masonry surcharge. Plaster-and-lath over wood stud, rehab drywall and metal stud carry no surcharge. The bracket is a separate charge, your own or one of ours.

Do you offer same-day TV mounting in Lincoln Square?

Yes, for bookings made before noon. Book online or by phone at (470) 777-4077, and an installer from our vetted Cook County network arrives within 2-4 hours of confirming a same-day request. That goes for Ravenswood, Ravenswood Manor, Ravenswood Gardens, Bowmanville and Budlong Woods alike.

In a Lincoln Square two-flat, is the brick side wall or the plaster partition the better place for a TV?

Both hold a TV when the right hardware is used, so the room decides first. If either wall suits your seating, the plaster-and-lath partition is the simpler job: lag bolts into wood studs, no surcharge, and a cavity for hiding cables. The common brick wall takes Tapcons, adds +$99 as masonry, and needs a surface raceway for cables.

Can the installer add an outlet behind my TV in Lincoln Square?

No. Lincoln Square is in the City of Chicago, and the Chicago Electrical Code requires wiring in metal conduit, so a new outlet is an electrician's job. What we do is low-voltage: HDMI and other signal cables hidden in the wall for $99 per TV, or run in a surface raceway. If there is no outlet behind the TV spot, the power cord follows the raceway to the nearest one.

Who does the work at a Lincoln Square address, and who answers for it afterward?

An installer from our vetted Cook County network does the work, using the hardware list and the install checklist Express Mounting uses in Atlanta. The flat rate is fixed when you book. Afterward, the 3-year workmanship warranty is held by Express Mounting, not the individual installer.

Call (470) 777-4077 Text a photo

Text a photo of your wall

Point your phone's camera here to start a text to +14707774077. Add a photo of the wall and your TV's size, and we reply with your price and the first open time.

QR code that starts a text message to +14707774077
Use the quote form instead